1

I'm trying to get monerod to work after running monero-blockchain-prune. It didn't seem to be working right and I found that monero-blockchain-import --pop-blocks ... might help. So I popped off the last 100 blocks, and it fixed the issue, but now it seems to just be stuck on a loop of what I posed below. I tried --no-sync and in-peers 10 but neither have gotten it to work like it was working before.

2021-05-21 02:05:41.679 I [142.93.228.111:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:41.680 I SYNCHRONIZATION started
2021-05-21 02:05:42.076 I [144.91.122.162:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:42.077 I SYNCHRONIZATION started
2021-05-21 02:05:42.978 I [212.83.172.165:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:42.978 I SYNCHRONIZATION started
2021-05-21 02:05:43.376 I [144.91.122.162:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:43.376 I SYNCHRONIZATION started
2021-05-21 02:05:43.841 I [80.111.125.243:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:43.841 I SYNCHRONIZATION started
2021-05-21 02:05:44.238 I [144.91.122.162:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:44.238 I SYNCHRONIZATION started
2021-05-21 02:05:44.543 I Host 144.91.122.162 blocked.
2021-05-21 02:05:44.699 I [188.117.224.141:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:44.699 I SYNCHRONIZATION started
2021-05-21 02:05:45.249 I [142.93.228.111:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:45.249 I SYNCHRONIZATION started
2021-05-21 02:05:45.558 I Host 207.246.77.199 blocked.
2021-05-21 02:05:45.902 I [80.111.125.243:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:45.902 I SYNCHRONIZATION started
2021-05-21 02:05:46.222 I [76.22.65.8:18080 OUT] Sync data returned a new top block candidate: 2365193 -> 2365471 [Your node is 278 blocks (9.3 hours) behind]
2021-05-21 02:05:46.222 I SYNCHRONIZATION started
Improve this question
10
  • As you popped blocks, you need to sync, hence I'm clear why you are using --no-sync.
    – jtgrassie
    Commented May 21, 2021 at 2:29
  • @jtgrassie I'm very new to this and don't know too much about what's going on. I was just trying anything to get it to work like it used to. Since it just kept looping about syncing, I thought maybe it would help.
    – Mason
    Commented May 21, 2021 at 4:13
  • Mason, if you don't know what the flags do, don't use them. Just let your daemon sync.
    – jtgrassie
    Commented May 22, 2021 at 1:00
  • @jtgrassie can you tell me what it's doing? This is not how it behaved before the prune.
    – Mason
    Commented May 22, 2021 at 3:50
  • 1
    @jtgrassie that picture is what happens when I just run monerod, no flags.
    – Mason
    Commented May 22, 2021 at 17:44

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.