Questions tagged [monero-wallet-cli]
The official command line wallet available for Monero on Linux, Windows, ARM, and MacOS.
488
questions
1
vote
0answers
7 views
Is it possible to generate test transactions from a specific blockheight?
Let's say I used monero-blockchain-import --pop-blocks n to roll back my node to a specific block height. Then I want to generate some test transactions using the set of UTXOs available at that point ...
0
votes
1answer
29 views
How to decrypt a wallet
I'm trying to implement a wallet reader in node.js. My goal is to move the core wallet RPC server to the node.js server, by implementing the monero-cli wallet decryption code.
Resources
Here are some ...
2
votes
1answer
38 views
How do I specify a change address with monero-wallet-cli transfer?
How do I specify a change address with monero-wallet-cli transfer address amount? Where can I find more information about monero-wallet-cli transfer? monero-wallet-cli --help does not give me anything ...
0
votes
0answers
27 views
Account#0 Primary account returns an old balance, Wallet restored with Electrum seed syncs but no coins shown
I see dEBRUYNE answered similar in 2018.
Linux Mint 20 and monero-wallet-gui in conjunction with Ledger Nano S.
Device initiates. Monero 'Oxygen Orion' (v0.17.2.0-release).
Stalls on Forking to ...
0
votes
1answer
49 views
Seeking tool to inspect/study monero cli source code
I'm interested in digging in Monero CLI source code... not a specific reason for now, just hoping to get enough confidence to look at code as authoritative source of information when I have doubts.
I ...
0
votes
0answers
44 views
Wallet does not correspond to `.keys`
I changed the password of my wallet, upon realizing that that destroyed my seed phrase, I decided to try to change it back to see if the seed phrase would come back. Now I'm locked out of my wallet ...
0
votes
1answer
78 views
monero-wallet-cli and monerod has different block height
Running monero-wallet-cli on macOS gives me this error:
The wallet's refresh-from-block-height setting is higher than the daemon's height: this may mean your wallet will skip over transactions
The ...
0
votes
0answers
30 views
SYNCHRONIZATION started loop
I'm trying to get monerod to work after running monero-blockchain-prune. It didn't seem to be working right and I found that monero-blockchain-import --pop-blocks ... might help. So I popped off the ...
0
votes
1answer
26 views
Lost in transfer?
Whats going on here?
Version: Monero 'Oxygen Orion' (v0.17.2.0-release)
Fully synced local node
Start balance: .353514567807
Transfer: transfer <wallet address> .003514567807
This should have ...
0
votes
1answer
18 views
What does ask-password = 1 (action) mean for the monero cli wallet?
I set ask-password = 1 (action). What does action mean? 2 means always ask password for everything you do right?
0
votes
1answer
239 views
Why does monerod allow mining from a pruned blockchain?
I started a new node from scratch with monerod --prune-blockchain, so when the blockchain was finished syncing, it only took up about 35GB on disk. My understanding is that one of the main tradeoffs ...
1
vote
1answer
29 views
Is there a way to get a current option value from within the monero-wallet-cli?
After launching the CLI and loading a wallet, you can issue commands; a list of which is available from help and help all.
The help set command shows a listing of options which can be set with set <...
0
votes
0answers
40 views
I Need Help Please With Monero GUI wallet issue
please help, I exchanged BTC to Monero using changehero.io and changenow.io, i am still yet to receive the funds on my xmr for two days now. I had two separate transactions, no one is reflecting on my ...
0
votes
0answers
33 views
Ledger Nano S Software to access
Is there any other Wallet/Software with wich I can access my Monero on a Ledger Nano S.
I am no "fighting" 3 days !!! with Monero GUI Wallet or Monero Wallet CLI to get access to my funds. ...
0
votes
1answer
96 views
Monero Daemon - cannot send transaction(s) no available connections
Using Ledger Nano S
I have a 100% downloaded Blockchain - Synced ok ...
But the Daemon warns: "cannot send transaction(s) no available connections"
I assume that is the reason why - no ...
0
votes
1answer
38 views
Do private remote nodes save any wallet related data to disk?
I am considering setting up my own private remote node.
If I connect to that node over Tor using the official GUI wallet running on Tails, is any wallet related data saved to disk on the server ...
0
votes
1answer
31 views
Logic behind selecting even square root for fe_sqrtm1 = sqrt(-1)
That is the logic behind selecting even square root for fe_sqrtm1 = sqrt(-1)
x = sqrt(-1)
x = 547cdb7fb03e20f4d4b2ff66c2042858d0bce7f952d01b873b11e4d8b5f15f3d
x = ...
0
votes
0answers
54 views
How can I create a simple private pool for tracking hashes for me and my friends trying to mine a block by ourselves?
For context, me and my friends have assembled a little mining group for fun and we currently mine whatever is most profitable on cpu and gpu to the same address on the same pools. I programmed a ...
2
votes
1answer
409 views
Advantages of using monerod over Tor
According to the README, it seems like only the transactions sent from local RPC to the daemon get propagated through Tor. I am unable to understand why this choice was made/what its advantages may be....
1
vote
1answer
91 views
Missing 1 character in Monero address generation from a seed using Javascript
I have an interesting one off case with a Monero address generation where I am generating a 94 character Monero address vs 95 characters. However when I take the private_spend_key and run it through ...
1
vote
1answer
34 views
Is it possible to see the number of confirmations and source address using Monero wallet CLI?
GUI version provides number of confirmations and address from which coins were sent.
But I don't know how to see it using CLI version of wallet.
I tried to use show_transactions and show_transaction &...
0
votes
1answer
95 views
How to batch-send multiple transactions
Trying to avoid paying unnecessary fees when sending multiple transactions (to different people) we wanted to implement transaction batching - sending one transaction with multiple receivers (as it ...
0
votes
1answer
500 views
How do I delete an account from my monero wallet?
Using monero-wallet-gui, I accidentally created an account in my wallet. Now, I see this account in the account list whenever I use monero-wallet-gui or monero-wallet-cli.
Is it possible to delete ...
1
vote
1answer
61 views
Why wallet download page is unecrypted?
Why is monero website using https but when you click to download the command line wallet you get a warning from the browser that the site is not safe? You end up having to click through warnings to ...
1
vote
1answer
32 views
How to output the monero-cli-wallet commands using --comand “status” without all the other output data?
./monero-wallet-cli --wallet-file=XXXX --daemon-address YYYYY --command "balance"
When I use the above command, it gives me the ability to see my balance, but how do I make it where it ...
1
vote
1answer
50 views
Where can I find the “help set” of commands with examples for the monero cli wallet?
Is there a page where I can see all the help set commands for the monero cli wallet?
0
votes
1answer
41 views
Are the blocks mined by a wallet shown as transaction?
How can one be sure that a wallet address has mined 1 or more xmr blocks?
Do they show as transactions or is there any way to confirm?
I ran a wallet with monero wallet cli and upon running ...
0
votes
0answers
52 views
How automatically to forward monero from one address to another?
Basing this question on this Bitcoin one: https://bitcoin.stackexchange.com/questions/12280/how-automatically-to-forward-bitcoins-from-one-address-to-another
For bitcoin auto forwarding, the answer ...
0
votes
0answers
59 views
I added some addresses to my address_book in the cli monero wallet. How do I send to it?
I added an address to the address_book in the cli wallet. I tried to do
transfer my_saved_address 10
doesn't work. What is the correct command?
0
votes
1answer
188 views
monero-wallet-cli mining
After running monerod I started mining with the command start_mining (my wallet adress) 1.
After a while I ran the command mining_status.
The result was this:
mining_status
Mining at 101 H/s with 1 ...
0
votes
0answers
18 views
Critical problem, there is no information about the transaction and also problems with launching the wallet
I mined a certain amount of monero on the hashvault pool, and then I did not receive my transaction. I thought about this for a long time, and after a while I got gaps with starting the wallet, the ...
2
votes
1answer
1k views
What is a reliable Monero remote nodes that is used in the CakeWallet mobile app?
I tried many of the monero nodes on monero world and many of them do not connect reliably when using the wallet cli. I find the cake wallet mobile app remote node to be most reliable. What is the ...
1
vote
0answers
18 views
monero-wallet-cli --restore-deterministic-wallet does not accept input after asking for seeds
Antivirus erased monerod.exe, had to reinstall Monero, which created a new wallet. Followed help instructions to recover old wallet (in directory with monero-wallet-cli.exe, opened command line, ...
1
vote
0answers
142 views
monerod.service: Can't open PID file
I'm using the following guide in order to setup a Monero node on my computer:
Monero Node Guide
I am on step 4 and when I run sudo journalctl -fu monerod.service I get the following log:
monerod....
1
vote
1answer
96 views
How to properly transfer XMR in monero-wallet-cli?
Usually I use the following command to transfer XMR:
transfer normal 11 <address> <amount>
But now I see people are using just:
transfer <address> <amount>
They don't specify ...
0
votes
0answers
24 views
Unable to paste view key when creating a View Only Wallet
I’m using ./monero-wallet-cli to create a view only wallet on Windows 10.
First the command I’m using ask for the address. I paste it in and hit enter. Then I’m asked for the secret view key. I’m now ...
3
votes
1answer
362 views
How to fix “Exception in main! locale::facet::_S_create_c_locale name not valid” when starting monerod?
If you have upgraded to 17.1.0 of the monero wallet software and run into the error
Exception in main! locale::facet::_S_create_c_locale name not valid
... when starting monerod
1
vote
1answer
104 views
Monero daemon sees deposit but doesnt record it
Coding a wallet for my website. I built a testnet and stagenet wallet. Both versions same issue so I think it's me. Utilizing xmr.to for test coins and the node address.
I start the wallet RPC like:...
0
votes
0answers
65 views
Run Monero in an msys2 environment on the local network
I am in an msys2 environment and I am using this answer, but it has the error below:
root@DESKTOP-EEM7CKJ MINGW64 ~/monero/build/MINGW64_NT-10.0-18362/master/release/bin
$ ./monerod.exe --stagenet --...
1
vote
1answer
257 views
How does a user pay a monero node operator via the RPC pay feature?
The latest monero update gave users the ability to pay monero node operators via the RPC pay to feature. How does a monerujo android app or monero-cli query the monero address of a node operator to ...
0
votes
0answers
807 views
failed to connect to daemon on tails
My cli wallet was working before but now I get the error mesage when I log in (or refresh) that the wallet cannot connect to daemon.
Error: wallet failed to connect to daemon: >2xmrnode5itf65lz....
0
votes
1answer
114 views
How open Monero wallet and sweep_all with one command in CLI?
I want run only one string in command line.
And that after executing this command, the wallet opens, syncs, and funds are sent.
1
vote
1answer
116 views
How sweep_all without prompt in CLI?
I want run sweep_all command, but I don't want entering password or press "Y" (when prompt).
1
vote
1answer
281 views
Mining for rpc set number of threads
In the monero-wallet-cli having connected to a public node that accepts or requires payment via mining how does one adjust the number of threads used for the mining payment.
For example, when you run ...
1
vote
2answers
187 views
Not receiving stagenet XMR to cli-wallet
I created a monero CLI wallet a few weeks ago with the --stagenet option:
./monero-wallet-cli --stagenet --generate-new-wallet ~/example_stagenet_wallet
I've now just connected it to the monero ...
0
votes
1answer
170 views
getmonero.org - Linux 32-bit CLI wallet
When I want to install the CLI wallet I can't the GUI because it's only compatible with the 64-bit. I get this error: monerod: cannot execute binary file: Exec format error
Is the 32 bit version ...
1
vote
0answers
48 views
how do I make a simple payment portal for accepting monero payments on my website, without third party service?
I run a brick and mortar shop and I really like the gui wallets merchent view page. I would like to add similar functionality to my website, but I have no idea how to do that.
Its a simple one page ...
0
votes
1answer
72 views
How to open a Monero CLI wallet by specifying the wallet name?
I have wallet file. How I can open it from command line parameters?
1
vote
1answer
164 views
View monero subaddress balance without monero-wallet-cli
Is there any way to
get the balance of a subaddress, with only the view key (programmaticly) and no monero-wallet-cli installed? At best a js lib. Assume it is connected to an open node.
run the ...
0
votes
1answer
141 views
Monero cli show_transfers transactions for only a specific subaddress
I have a few subaddresses with small amount transactions. How do I view only these transactions that were sent to this subaddress? I already switched to the account account switch 1, but when I do ...
