All Questions

Basing this question on this Bitcoin one: https://bitcoin.stackexchange.com/questions/12280/how-automatically-to-forward-bitcoins-from-one-address-to-another For bitcoin auto forwarding, the answer ...

I found that my Monero GUI wallet keeps crashing during the initial blockchain synchronization, and when I start off from where it crashed, data.mdb in C:\ProgramData\bitmonero\lmdb has been corrupted ...

i am just mining on cpu thats an xeon 1230 and i get around 1.2KHs i am thinking to scale it up and looking for an appropriate hardware but i see that gpus arent that efficient to mine xmr please help ...

Error: “Daemon Failed to start Timed out, local node is not responding after 120 secs” when trying to sync GUI Monero wallet I'm trying to sync GUI version: 0.17.1.9 in Advanced mode (Local node) ...

I would be grateful for some help. I haven't logged into the Monero GUI for a while, and had to update and sync the blockchain. While syncing my computer crashed, and now when I try to sync I get the ...

I added an address to the address_book in the cli wallet. I tried to do transfer my_saved_address 10 doesn't work. What is the correct command?

I try to get the transaction by calling get_transfer, but I dont know how to send the $subaddr_indice to get the right answer back i have: [subaddr_indices] => Array ( ...

After running monerod I started mining with the command start_mining (my wallet adress) 1. After a while I ran the command mining_status. The result was this: mining_status Mining at 101 H/s with 1 ...

I am trying to understand how Monero hashes blocks. I understand there is something called a "block hashing blob" that is combined with a nonce, but how can I get the block hashing blob for ...

I'm trying to sync GUI version: 0.17.1.8-8e6a2cde (Qt 5.9.9), Embedded Monero version: 0.17.1.8-release, in Advanced mode (Local node). These are the steps: Launch Monero Desktop app Put in 8 PIN to ...

Noob here. I installed "Monero-Wallet-gui.AppImage" on my linux box, after quickly going through the prompts I created a basic account using an external node. What if I changed my mind and ...

I recently installed the Monero GUI wallet and connected it to my Ledger Nano S. I then transferred my Monero from Binance to my GUI wallet address and received a successful Transaction ID From ...

Assuming a fee of .033usd per transaction and an average energy cost of .141usd per kwh, it takes .033 / .141 = .234kwh for one transaction. Another way to calculate it is if there are 17921 ...

I wanted to contact developers of Monero. On website getmonero I didn´t find any contact info. So I would like to tell about problems with wallet. It often freezes, daemon fails to start, not always. ...

I'm having trouble seeing the funds in my wallet so I want to update to a newer version. However the 90GB blockchain is quite large and I'm wondering if I need to install the blockchain again or does ...

I created my XMR wallet on my ledger nano S in March 2020, Im using a different computer to the one i initially used. Currently i am unable to see any funds? i downloaded the GUI, but i am having ...

I purchased monero years ago and stored it on My Monero. I entered my 12 memetic phrase today and all the monero is gone. I already reached out to customer service to get help. If it helps I'm on a ...

I mined a certain amount of monero on the hashvault pool, and then I did not receive my transaction. I thought about this for a long time, and after a while I got gaps with starting the wallet, the ...

I am writing an online store able to accept XMR payments. I know there are some existing solutions to do so, but this project is self-educational rather than commercial. Serverside, I run a monerod ...

It has been more than 30 hours, and the transaction is still pending. If I check the "transaction private key" through the "https://xmrchain.net" website, it does not exist. What ...

I'm currently studying about security about Monero, and I found something weird. I know that the ouputs of Monero transactions are identified by amount and indices (amount 0 for RingCT), and the ...

Hello hopefully can help me and my friends mum out. My best friend past away suddenly just before christmas and i have started to sort out his affairs for his mum who is 80 years old. I know he has ...

This is a follow-up question based on this answer: https://monero.stackexchange.com/a/12600/ Many things proposed and rejected for Bitcoin have found a place in Monero (privacy for starters). That ...

Have installed latest version of Monero on Windows and performed following; Created wallet from hardware (Ledger Nano S) Synchronised deacon Balance now showing correctly from a previous transaction ...

I'm new to Monero, and installed the Monero wallet GUI yesterday on my iMac running MacOS Catalina. The GUI version is 0.17.1.8-8e6a2cd (Qt 5.12.8) and is connected to my Ledger Nano S. The Monero ...

Dandelion or Dandelion++ was not implemented in Bitcoin because few bitcoin devs thought it could result in DoS attacks: https://bitcoin.stackexchange.com/a/81504/ I was reading the blog post https://...

I bought a little XMR years ago back when the most up-to-date GUI was v0.11.1.0 (running a local node on MacOS). I hadn't touched my XMR balance since and just finally decided to try to update to the ...

I've recently set up a hardware wallet using Monero CLI as described here. I am wondering if I am able to access this wallet on any computer with Monero CLI installed? I was not able to use the "...

I downloaded the latest version of the monero gui. I have some monero on my ledger nano x and the installation and the connection with the ledger works fine. The Daemon failed to start and the gui ...

I downloaded the case study from https://github.com/monero-integrations/monerophp. I have also made the necessary arrangements but I am getting an error:

Unable to sync in the last week. Assume this could be network issues you are having. Please advise. GUI version 0.17.1.7 and Ledger nano s ver 1.6.1.

I checked the hash speed of my system. It is around 600 H/s for an intel i7 processor. I checked this with crypto compare profit calculator: Hash power: 600 H/s, Power consumption: 50w, Electricity ...

The Monero source code specifies sweep single, and sweep all in its RPC Server Commands section. What is the difference?

I download the update 0.17.0.1-afc2e84(QT 5.9.9) and now it's taken me back to the original options (language, mode selection, open a wallet etc. Where do I find my old wallet key on my PC? I don't ...

I tried many of the monero nodes on monero world and many of them do not connect reliably when using the wallet cli. I find the cake wallet mobile app remote node to be most reliable. What is the ...

I'm looking for the same behavior as this site https://xmr.llcoins.net/checktx.html but in Python. The only method I have at the moment is to use a Monero CLI but this is not really efficient. If such ...

Good morning, I did my 1st transtfer from Kraken to the Monero GUI yesterday. It took around 40 minutes with 480 confirmations. After that I sent the Monero to my Ledger S. Now this transfer takes ...

I checked in crypto compare calculator about hash power required for profitable Monero mining. It showed that 1MH/s is required to earn 0.5174 XMR or $86.18 per day I checked Monero benchmarks and ...

When trying to access my wallet on Ledger I get an error message. I'm using GUI version 0.17.1.7. Error message= Couldn't open wallet wrong device status: 0x6e00(sw_cla_not_supported), Expected 0x9000(...

Antivirus erased monerod.exe, had to reinstall Monero, which created a new wallet. Followed help instructions to recover old wallet (in directory with monero-wallet-cli.exe, opened command line, ...

In tests/unit_tests/base58.cpp it mentions an old address format. What exactly is the history behind this? This is the example given. ...

When starting the computer and trying to run Monero it got blocked by BitDefender. Been running the software for a few days but this never happened before. Wallet is empty so I am not risking anything....

Does anyone know what it means that whenever I try background mining either with the wallet or daemon my monero crashes? To be clear I am using pymonero and am getting the following error when running ...

I'm using the following guide in order to setup a Monero node on my computer: Monero Node Guide I am on step 4 and when I run sudo journalctl -fu monerod.service I get the following log: monerod....

For instance core-proxy is an executable under tests and is listed under enabled-tests but has no add_test call in its CMakeLists.txt. I noticed it with some other folders as well like daemon_tests. ...

I want customize a transaction to include some data. Monero has tx_extra (src/cryptonote_basic/tx_extra.h) and I know how to use monerod RPC /send_raw_transaction. I want to send nonce data whose ...

I am reading the book Zero to Monero: Second Edition from the GetMonero Library. On the 3rd paragraph of page 15, the book mentions an algorithm for finding points inside the subgroup of order l, ...

I tried to read a Monero guide but I don't understand some things. I have addresses that start with 4wzx, 8AAA and 8sgs in Accounts and 8AAA and 8gjm in Receive. Why are 8AAA and 8AAA the same, but ...

Is this article truthful when it quotes a hash rate of three million when mining Monero? If so, what is the way to learn and apply the RandomX algorithm in FPGA hardware? What knowledge is required? ...

I have the site xmrto.cash and just want to accept and send XMR. I was told MoneroPHP is a good way to do this but am having trouble just understanding how to install and use it. What is the first ...