Questions tagged [monerod]

Name of monero daemon (replacing bitmonerod) starting with the v0.10.0 - Wolfram Warptangent - release

Filter by
Sorted by
Tagged with
0
votes
3answers
118 views

Transactions appearing out of nowhere when running monero in local network

I've followed the instructions here to run monerod and monero-wallet-cli only on localhost. After I started mining, I noticed transactions showing up in my wallet: Height 350, txid <...
2
votes
2answers
755 views

Run monero only in local network

I want to run some tests on monero, but I only want monerod to communicate to peers on my local network. I don't want it download the official blockchain. I want my wallet, which I will run from my ...
0
votes
1answer
224 views

Monerd error on rpc-bind to make a public node

I set my rpc-bind-ip=x.x.x.x in my bitmonero.conf file and used my public IP addres. But I am getting this error: ERROR default src/rpc/rpc_args.cpp:80 --rpc-bind-ip permits inbound unencrypted ...
1
vote
2answers
765 views

What is a .bitmonero.conf template for setting up a public remote node to be accessed with the monerujo android wallet?

I'm trying to setup my own .bitmoner.conf file and looking to create a public node to be used with the android monejuro app. What are the options I need to put in my .bitmonero.conf file? I want to ...
2
votes
2answers
1k views

Is there a monerod config file to change certain settings when you run monerod in linux?

I'm looking to change the default port of monerod for RPC, but I wasn't sure is there a monerod hidden config file I can put in my home folder to set the settings? And what other useful settings are ...
1
vote
1answer
64 views

Universal pool configure mining wallet

We have created a mining pool with Monero as a universal pool. I want to know how long it will take to start digging and earn what is mined in my wallet.
2
votes
1answer
76 views

How much traffic does the simplewallet use?

Lets assume I want to start to sync from the last 10.000 blocks. What does the wallet need to refresh from the monero daemon or remote node? Something like block headers? How big is that that needs ...
0
votes
1answer
492 views

Is mining monero to a subaddress supported?

I tried to send coin for a monero address and I tried also to mining this address but an error message will be displayed : " Error: subaddress for mining reward is not yet supported!" How can I ...
2
votes
1answer
448 views

Monero RPC send transaction from address

I used the following command to pass a monero transaction with the daemon : {"jsonrpc":"2.0","id":"0","method":"transfer","params":{"account_index":2,"destinations":[{"amount":100000000,"address":"...
1
vote
1answer
508 views

Check balance of an address by Monero RPC

In monero RPC, to consult the balance of a wallet we used the following command: "{"jsonrpc":"2.0","id":"0","method":"getbalance"}" How then we will do to consult the balance of an address belonging ...
0
votes
2answers
2k views

Monero wallet balance still zero after transfer

As a setup test, a friend has attempted to send me 0.3 Monero to my Monero Wallet. My Wallet was offline at the time. I have started the server using ./monerod --offline and running ./monero-wallet-...
1
vote
1answer
455 views

Unauthorized access when calling monero-wallet-rpc

I configured the monero RPC with the following command lines: 1/ Firstly I run the monero daemon : ./monerod --testnet --rpc-bind-ip=x.x.x.x --rpc-bind-port=28081 --rpc- login user:password -...
0
votes
2answers
1k views

How to create a Genesis Block

I would like a plain and simple answer. How do you create a Genesis block for a new Monero Fork? I know this has been asked many times before but all I can find is closed questions saying "...
1
vote
1answer
352 views

error first running new monero fork build

I built a new Monero Fork. Trying to run it for the first time and getting errors: 2018-07-05 10:09:30.989 7612 ERROR cn src/cryptonote_basic/cryptonote_format_utils.cpp:167 Failed to ...
0
votes
2answers
899 views

Can't connect to my full node outside my local network

I've been having trouble connecting to my monero remote note from outside my local network. This is the command I've been using to launch the daemon: monerod.exe --data-dir E:/bitmonero --rpc-bind-...
0
votes
1answer
350 views

Automate mining on windows

I am running mining on Windows 10 Pro in Microsoft Azure using MSYS2 MinGW 64-bit. My process to mine currently is: OPEN a MSYS2 terminal (lets call this MSYS2 A), navigate to appropriate directory ...
1
vote
2answers
347 views

Error starting monerod

When running ./monerod --offline I get the following output. Running on Windows 10 Pro in Microsoft Azure using MSYS2 MinGW 64-bit The error messages are in bold. monerod does not run. 2018-07-04 ...
1
vote
2answers
208 views

Mining from multiple servers to local wallet

I am mining using ./monerod on Windows 10. I have created a wallet using monero-wallet-cli. I want to setup more machines that run ./monerod. How can I set them up so they mine to one wallet and ...
1
vote
1answer
436 views

Monero hashrate falls dramatically on Azure Windows 10 Pro

I am mining Monero offline using ./monerod --ofline on a Windows 10 Pro virtual machine with 2 VCUs in Microsoft Azure. Mining is performed in M2SYS using the start_mining command with 2 threads (...
2
votes
1answer
588 views

monero-wallet-cli Error message: refresh failed

When I run *monero-wallet-cli * I get an error message. However, the Wallet does start. The code is being run in a MSYS2 MinGW 64-bit terminal on Windows 10 Pro. Another window is open running ./...
1
vote
0answers
79 views

Changing difficulty levels, pre mining etc of Monero Fork

If I have a custom coin based on a Monero Fork and want to change the setup e.g. difficulty levels, pre mined coins etc. As long as I keep the Genesis block the same, are there any implications?
1
vote
1answer
135 views

Building Monero From Source on Windows 10 Pro

I am following the Windows Guide here to compile from Source: https://github.com/monero-project/monero When I enter the command: make release-static-win64 I get the following error: > spencer@...
0
votes
1answer
133 views

Building Monero Fails but works?

I am building Monero from source on Ubunto 16.04 LTS. Eventually, it gets to 98% but then gives an error. However, I am still able to run monerod. Can anyone elaborate as to what has happened? (I ...
0
votes
1answer
920 views

Monero Forking Guide

I have been recommended to use the CryptoNote Forking guide (https://cryptonotestarter.org/inner.html) as a basis for Forking Monero. However, there are a number of differences. For example, the ...
1
vote
1answer
59 views

Backup and Disaster Recovery for Monero Fork

For a clone of Monero in a production environment, what files/directories to be backed up and and what intervals?
2
votes
1answer
64 views

Migrating Monero Fork from Test to Production

When migrating from Test to Production of a Monero Fork, what needs to be considered? For example, launching the Seed Nodes in "--restricted-rpc" mode.
1
vote
1answer
76 views

Mitigating Risks of Forking Monero

When Forking Monero on GitHub, the code base becomes a public repository. The benefit of Forking as opposed to cloning into a private repository is that the link to the original code base is ...
3
votes
1answer
4k views

What is the 'bootstrap node' when creating a monero wallet via the GUI?

Been awhile since I generated a wallet with the monero GUI and noticed this new section called 'bootstrap node' in the daemon settings section when creating a new wallet - what exactly is this? ...
5
votes
2answers
3k views

What is the monero stagenet?

Realised there was no SE question for what the 'stagenet' is when setting up a monero wallet via the gui or CLI. From my understanding the stagenet is a sandbox environment similar to testnet but is ...
5
votes
1answer
765 views

monerod v0.12.2.0 does not start on Linux because of "./monerod: error while loading shared libraries: libpcsclite.so.1"

monerod v0.12.2.0 does not start on Linux because of "./monerod: error while loading shared libraries: libpcsclite.so.1". How do I resolve this particular issue?
1
vote
1answer
92 views

How to include libboost into the executable? (Ubuntu)

I am able to build everything, but I always have to do: export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$(pwd)/libs to have boost available. Is there a way to include it inside the library? My compile ...
3
votes
2answers
92 views

How can I build a specific branch of Monero?

I would like to build a specific branch of Monero, and I would like help setting it up to build on Debian. Can someone help me please?
2
votes
0answers
3k views

Torsocks server failure when running monerod with Tor on Tails

I'm trying to run the Monero daemon (monerod) v. 0.12.2.0 with Tor on Tails 3.7.1. I'm doing exactly what is written here: Medium - Sheep’s Noob guide to Monero GUI in Tails 3.2. Basically: Download ...
1
vote
1answer
309 views

More detailed explanations for the db-sync-mode parameters? (i.e. safe, fast, fastest; sync, async; and nblocks_per_sync)

Can someone give more detailed explanations on what the various db-sync-mode parameters actually do in monerod and monero-blockchain-import, and why one might select each of them? (i.e. safe, fast, ...
1
vote
1answer
110 views

monerod system time

monerod logs (to bitmonero.log) a different time than the one my Linux OS is configured for. It seems like another timezone (-2 hours from my OS). How can I set up monerod to use the same time and ...
1
vote
0answers
268 views

I can't stop monerod (monero daemon)

So I'm using 0.12.2.0 on tails 3.7.1 and running a local node (through tor). I use these commands to start the daemon: sudo iptables -I OUTPUT 2 -p tcp -d 127.0.0.1 -m tcp --dport 18081 -j ACCEPT ...
1
vote
2answers
543 views

Getting notified about a new block on the Monero blockchain

Is there any method, other than polling, to subscribe to new blocks being published on the Monero network? I want to get notified whenever a new block is published on the network on my app.
0
votes
1answer
437 views

Getting balance of my address connecting to a remote node via RPC API?

I'm looking to build a Monero web wallet, but I'm not sure how to go about querying the remote Monero nodes to get an updated balance of an address. Let's say I have the Monero private keys, how do I ...
3
votes
2answers
949 views

Monero Testnet Faucet

How to run monero node in testnet mode for testing purpose and how to get testnet coin? Is there any testnet online portal for testing?
3
votes
1answer
1k views

How can I get my own genesis tx to use in my monero fork?

I have been searching for ever on how to get my own genesis tx for a monero fork. Everything I have tried has not work. I have tried using a cryptonote currency to generate a genesis tx then replacing ...
0
votes
2answers
645 views

Monero original giving me this strange line saying upgrade

2018-05-30 23:58:37.090 [P2P7] WARN global src/cryptonote_protocol/cryptonote_protocol_handler.inl:272 [1;31m[211.20.7.199:64432 INC] peer claims higher version that we think - we may be ...
0
votes
1answer
193 views

What is the proper way to monitor payment to a monero address

I am trying to build a transactional system that: Generates a new address for each customer. Waits for the confirmed balance on the address to reach a certain value. Launches a function once the ...
4
votes
2answers
432 views

Sending Monero to multiple integrated addresses

We want to transfer monero to multiple integrated address so we don't have extra payment ids. So we don't want transfer <address_1> <amount_1> <address_2> <amount_2> <...
1
vote
1answer
414 views

Wallet JSON RPC methods

I need the following JSON RPC methods. create new account (getnewaddress) get balance by address/account (getbalance) send balance to another address (sendfrom) import/export privatekey (...
1
vote
1answer
52 views

How to get miners transaction size?

When we try to send monero to someone using transfer [integrated address] 0.0016 how can we calculate the size where the priority is normal and ring size is default(may be 7) So I need an ...
0
votes
1answer
128 views

blockchain.raw download for the testnet?

I've started running monerod connected to the testnet but the sync is extremely slow. Is there a download for the testnet blockchain as per the regular blockchain (https://downloads.getmonero.org/...
0
votes
3answers
983 views

Method not found using Monero JSON-RPC in PHP

Fatal error: Uncaught RuntimeException: Request have return error: Method not found; Request: {"jsonrpc":"2.0","method":"getblockcount","params":null,"id":1}; in jsonRPCClient.php:166 I don't know ...
1
vote
0answers
695 views

Monero GUI wallet stuck/increasing while syncing blockchain

Monero GUI wallet stuck/increasing while syncing blockchain I downloaded the Monero GUI wallet and have been attempting to sync the blockchain for a couple of days now. I left it overnight with about ...
1
vote
0answers
63 views

Restored wallet in Qubes Monero client showing "not connected to daemon" despite being connected to daemon

I'm using it on Qubes, which I've never had the slightest problem with until Lithium Luna. I ended up reinstalling everything from scratch for a different reason (and by 'everything' I mean everything,...
2
votes
3answers
186 views

monerod v0.12.0.0 can't synchronize

I'm on Version 0.12.0.0 2018-05-10 08:03:53.066 [P2P6] INFO global src/cryptonote_core/blockchain.cpp:1464 ###### REORGANIZE on height: 1568536 of 1568547 with cum_difficulty 14490123635886036 ...

1
3 4
5
6 7
12