Questions tagged [monerod]
Name of monero daemon (replacing bitmonerod) starting with the v0.10.0 - Wolfram Warptangent - release
596
questions
0
votes
1
answer
20
views
Monerod frequent error (duplicate key: support_flags)
I've been running a Monero node for over a year and suddenly started getting the error below. I re-installed monerod and downloaded a new blockchain, but still receiving this frequent error:
2023-09-...
0
votes
0
answers
7
views
funds not in the wallet - don't see my funds [duplicate]
I uninstalled my wallet because the daemon wouldn't start, now I installed it but I still don't see my funds
0
votes
0
answers
8
views
Please Help. -- GUI wallet Daemon failed to start and can't find log or monerod and I can't see my money [duplicate]
When I open the wallet I keep getting this message "Daemon failed to start. Check your wallet and daemon log for errors. You can also try starting monerod manually."
I've scoured the monerod ...
0
votes
1
answer
18
views
Switching blockchain locations on a Windows machine
strange thing happened.
I am in the middle of syncing blockchain ~65%, and first decided to do it on a HDD.
Apparently it needs a lot of random I/O - I can hear the disk working. It's going to take ...
1
vote
1
answer
46
views
Consistent Seg Fault at 2850800 blocks
I'm attempting to sync the monero blockchain using the monerod CLI on my M2 MacBook. However, every time the sync reaches 96% complete (2850800 blocks), the process errors with a segmentation fault. ...
0
votes
0
answers
27
views
Error sending Monero transactions to my daemon [tx used wrong inputs]
After several checks made with the help of the community here on
Stack-Exchange, I was able to move forward with my problem.
Now I have reached the point that the transactions are not sent even ...
0
votes
0
answers
23
views
How to have list of incoming and outgoing tx given an address?
I have my full monero node and I'm trying to extrapolate from it, all the tx (incoming and outgoing) involving my address. Right now I'm using the monerojs library and scanning the blocks, the data I'...
1
vote
0
answers
35
views
I survived a “Segmentation Fault” error on monerod while downloading the blockchain and I don’t know why
I’m not an expert on how to manage or use the Monero functions or routines, but something odd happened to me and I can’t wrap my head around why that happened or if this is some sort of bug.
For ...
0
votes
1
answer
30
views
Setting the Monero blockchain location on macOS with monerod
I downloaded the macOS Monero GUI wallet and did a full node sync to an external SSD. I then started looking into the Monero CLI wallet and thought it would be useful for scripting some tasks.
Now I ...
0
votes
1
answer
34
views
monerod.exe Inbound malicious attacks
I just installed Monero GUI Wallet for the first time and during the sync, I am getting a LOT of inbound malicious attacks. Malwarebytes is blocking them but why am I getting them? How is it that ...
0
votes
1
answer
29
views
How does running a node benefit the network?
If I have the full node on my hard drive and the node daemon running, is there anything else I have to configure to benefit the Monero network? Do I have to configure a domain name for others to ...
3
votes
1
answer
59
views
Is Monero affected by the year 2038 / 2106 problem?
Unix timestamps usually are stored as a 32 bit integer, either signed or unsigned which will overflow either in 2038 or 2106. How are timestamps currently stored in Monero's codebase and blocks?
0
votes
1
answer
33
views
Does compiling with `-march=native` bring a measurable performance improvement for mining?
I see in other questions people are sometimes using this flag, which enables all instruction subsets supported by the local machine. Does it bring a performance improvement? Are there some benchmarks ...
0
votes
1
answer
23
views
When running on a rotating harddrive benefit from LVM caching on a SSD?
With LVM it's possible to set up a fast caching SSD partition that speeds up a slow (usually rotating HDD) one: Creating LVM Cache Logical Volumes
Would this alleviate slow performance of Monero ...
2
votes
1
answer
68
views
Does Monero require SSD for decent performance once it finishes the initial synchronization?
The warning in the logs
The blockchain is on a rotating drive: this will be very slow, use an SSD if possible
doesn't explain if just the synchronization will be slow, or also running the node ...
0
votes
1
answer
31
views
Where does a full node store transaction data?
When using a remote node, the node owner can see IP addresses linked to txIDs.
Running a full node means I can avoid trusting third parties and keep control over my data.
But I can't find where this ...
0
votes
0
answers
29
views
Monero daemon is not connecting to peers during initial sync
On a WIndows server 2016 machine, running monero 0.18.2.2-release.
New to monero.
Sorry if this is a basic thing but I've been troubleshooting this for 3 hours now.
When I start monerod.exe even with ...
0
votes
1
answer
77
views
About bitmonero.conf
Please excuse if my question is stupid but with current monero daemon node running on Windows 11 i do NOT have a config file in default location C:\ProgramData\bitmonero
So because of the reason that ...
0
votes
1
answer
60
views
How connect to monerod via xmrig
I have a node running monerod. The "problem" i've that node with password and i don't know how to connect xmrig with login.
I tried various combinations such -u -p, -O user:pass, -u user:...
1
vote
1
answer
44
views
`generateblocks` method not found, when called via json-rpc
I am using Moner (Monero 'Fluorine Fermi' (v0.18.1.2-release)) on ubuntu. I am running a regtest with this .conf file and these command line flags:
bitmonero.conf.
# /etc/monero/monerod.conf
#custom
...
0
votes
0
answers
51
views
Straightforward way to buy Monero with CC in the U.S.?
Many exchanges in the U.S. will let you use a MC or Visa but it has to be a debit card. If I'm looking to use a CC instead what would be the easiest way?
I don't mind exchanging from one coin to ...
0
votes
0
answers
30
views
I am getting error with stopping monero daemon
I started the monero daemon with the this command.
monerod --rpc-bind-ip 127.0.0.1 --detach --restricted-rpc --prune-blockchain --block-notify /bin/bash/home/user/nodejs-pool/block_notify.sh
When I am ...
0
votes
0
answers
75
views
Why do I get the message “error read(in tcp s) socket is not connected”, or “transaction not found in pool”?
When I run the Monero Daemon I get these messages. I’m on Windows 10 have AV but have allowed access. Any ideas?
0
votes
0
answers
94
views
XMR node security
Trying to work through a best setup for my XMRnode. Mostly focused on security, but anonymity is nice. I have the node running on my home IP and have forwarded ports. Used Sethforprivacy (advanced) ...
0
votes
1
answer
47
views
Facing an error when working with monero.fail (monero node tracker)
https://monero.fail/
This is the monero node tracker.
https://github.com/lalanza808/monero.fail
After following the steps to make the project work, I am facing an attribute error where the function ...
0
votes
0
answers
103
views
How can I run monero node in LAN?
Sorry to bother. I'm new to Monero. Recently I followed this article (https://github.com/moneroexamples/private-testnet#step-2-start-first-node) to set up a private chain consist of three nodes. But ...
0
votes
2
answers
185
views
Let`s say that i sent monero from kucoin to my monero wallet. Is this transaction anonymous?
The kucoin account is registered to my official e-mail addres. Do i need to use monero mixer? Which monero mixers accept small amounts of this coin (eg $10). What are the anonymous ways to transfer ...
1
vote
1
answer
37
views
Can someone explain me what is monero-blockchain-usage?
How can I access the monero-blockchain-usage and what is the use of it ? could someone explain after input our db what should I do ?
0
votes
0
answers
154
views
Monero Wallet's blockchain data refuses to change location
I followed this guide down to a T, as I'm trying to move the blockchain to D:\Monero GUI Wallet\bitmonero. It seemingly worked fine and didn't show any errors, and now I've got the blockchain data in ...
1
vote
0
answers
91
views
Broadcasting txs over Tor, is Dandelion++ still used?
According to Monero contributor selsta, when using the --tx-proxy option without noise_disabled:
[monerod] uses a combination of Tor, noise, randomized delays and Dandelion++ to break IP <-> ...
0
votes
0
answers
6
views
Error using relay_tx, transaction is not done for days [duplicate]
I sent a transction from my first to my second wallet. Its like days ago and nothing arrived in my second wallet, so i started searching the problem.
When i use the relay_tx command with my hash, it ...
0
votes
0
answers
276
views
Couldn't allocate RandomX cache
Using a new install of GUI version 0.18.1.2 - Fluorine Fermi - I've downloaded the blockchain onto an old MacBook Pro (macOS High Sierra 10.13) with a 500GB SSD and 8GB of RAM (the maximum I can ...
1
vote
1
answer
183
views
In monerod, is --add-peer necessary when using --tx-proxy to discover anonymous peers?
From https://github.com/monero-project/monero/blob/master/docs/ANONYMITY_NETWORKS.md it seems you don't have to specify --add-peer:
If desired, peers can be manually specified:
--add-exclusive-node ...
1
vote
1
answer
161
views
What's the difference between --no-igd and --igd disabled in the monerod options?
I'd like to explicitly forbid UPnP port mapping.
Does setting --igd disabled have the same effect as setting --no-igd? From https://monerodocs.org/interacting/monerod-reference/ :
--no-igd: Disable ...
0
votes
0
answers
160
views
How to get 18.1 to get working on Monero GUI
Im having a hard time getting the new 18.1 hardfork release to work on Monero gui. Please any help would be awesome. I logged in and it said download new version. i accepted but cannot seem to figure ...
1
vote
1
answer
244
views
Is network upgrade v15 still happening on Jul 16?
The release of 0.18 node software was supposed to occur on Jun 16, but I haven't seen any indication that occurred. What is the current status of the network upgrade and the software release?
1
vote
1
answer
109
views
What is Regtest?
I did not find much information about the regtest option for monerod. What does it actually do? What are the differences between testnet and regtest?
0
votes
1
answer
176
views
monerod in Linux, syntax for path --data-dir
What is the path syntax in Linux?
monerod --data-dir {different drive than monerod}
Drive of \data-mdb is formatted in Windows, monerod runs in Linux.
0
votes
1
answer
23
views
get_block returns empty tx_hashes array
I am trying to use the get_block JSON RPC endpoint documented here: https://www.getmonero.org/resources/developer-guides/daemon-rpc.html#get_block
The trouble I'm having is that when I call it, the ...
0
votes
1
answer
179
views
How to make monero transfers with node.js?
I'm trying to develop an application with react native to have access to monero accounts and then make some operations like get the balance, transfer and receive XMR. I found some javascript libs in ...
2
votes
1
answer
52
views
monerod in regtest mode does not remember the generated blockchain
I wanted to try generateblocks in regtest mode. It works, blocks get generated. Using the RPC call get_last_block_header I can see new blocks and their heights.
Problem is that after monerod restarts, ...
0
votes
1
answer
336
views
Monero RPC Help
I'm having an issue with using the Monero RPC.
My node is all setup and working and using monero-wallet-cli I can create a wallet, send funds etc, however when I try to use the RPC I get the following ...
0
votes
1
answer
342
views
Local node stuck 3.8 month behind (current height: 2504635)
I installed monero gui on Windows a week ago and created my first wallet, unfortunately I ran into an issue with my local node.
FYI, my monerod version is 0.17.3.0-release
It does not synchronize all ...
3
votes
1
answer
689
views
How do `rpc-bind-ip` and `restricted-rpc` and `rpc-login` interact?
Let's say that I were to pass --rpc-bind-ip 0.0.0.0 to monerod, and also --restricted-rpc (along with the external bind confirmation), what would the outcome be? What does the second command do when ...
0
votes
1
answer
707
views
Why is mining hashrate by monero-gui-v0.17.3.1 significantly slower than xmrig-6.16.2-focal-x64?
I have been experimenting with solo mining Monero using two approaches on the same machine: monero-gui-v0.17.3.1 and xmrig-6.16.2-focal-x64. The monero-gui reported a hash rate of ~6KH/s while xmrig ...
0
votes
1
answer
453
views
Monerod synchronization so slow it can't catch up to Blockchain on Raspberry Pi 4 + SSD
I want to set up a Monero full node on my new Raspberry Pi 4.
First, I've downloaded the full blockchain by running monerod on my laptop on an external SSD, because I noticed doing so on the Raspberry ...
0
votes
1
answer
154
views
Potentional Monero future vulnerabilities
What happens if Monero has vulnerabilities in the future? Would it be possible that it could expose old transactions information such as addresses and amounts? How likely would this be? I am running ...
0
votes
0
answers
87
views
detach=1 in bitmonero.conf gives "Error parsing config file: unrecognised option 'detach' ". Why so?
Setting detach=1 in bitmonero.conf gives me
Error parsing config file: unrecognised option 'detach'.
whereas applying --detach from the command line works fine. Why so?
The recognition of other ...
1
vote
1
answer
116
views
Mine to remote address with monerod
I started the mining process with:
start_mining <walletaddress> 16 and,
start_mining 16 <walletaddress>
Both returned: Error: invalid argument: must be either 0/1, true/false, y/n, yes/no
...
0
votes
1
answer
122
views
Why Monero needs ring signature?
I am looking through the whole Monero privacy system, wondering why Monero needs ring signature? One can use stealth address to protect the identities of both sender and receiver.
Suppose the longtime ...