Skip to main content

Questions tagged [monerod]

Name of monero daemon (replacing bitmonerod) starting with the v0.10.0 - Wolfram Warptangent - release

Filter by
Sorted by
Tagged with
1 vote
1 answer
3k views

Please Help! -- GUI wallet Daemon failed to start and can't find log or monerod

I'm running the GUI wallet v0.15.0.2 with a Ledger Nano S (the Ledger is updated as of yesterday) on a mac. When I open the wallet I keep getting this message "Daemon failed to start. Please check ...
0 votes
1 answer
47 views

How do I run monerod exclusively over ip2 with i2pd (unreachable over clearnet)?

Following this tip, I launched my node with monerod --detach --prune-blockchain --tx-proxy i2p,127.0.0.1:8060 --add-peer core5hzivg4v5ttxbor4a3haja6dssksqsmiootlptnsrfsgwqqa.b32.i2p --add-peer ...
0 votes
1 answer
21 views

monero regtest generateblocks returns status "BUSY"

I am running a Monero node in --regtest mode. generateblocks always returns status "BUSY". gen_info() does not say it is busy though.
2 votes
1 answer
470 views

error first running new monero fork build

I built a new Monero Fork. Trying to run it for the first time and getting errors: 2018-07-05 10:09:30.989 7612 ERROR cn src/cryptonote_basic/cryptonote_format_utils.cpp:167 Failed to ...
0 votes
1 answer
217 views

About bitmonero.conf

Please excuse if my question is stupid but with current monero daemon node running on Windows 11 i do NOT have a config file in default location C:\ProgramData\bitmonero So because of the reason that ...
0 votes
2 answers
351 views

Let`s say that i sent monero from kucoin to my monero wallet. Is this transaction anonymous?

The kucoin account is registered to my official e-mail addres. Do i need to use monero mixer? Which monero mixers accept small amounts of this coin (eg $10). What are the anonymous ways to transfer ...
0 votes
1 answer
529 views

Local node stuck 3.8 month behind (current height: 2504635)

I installed monero gui on Windows a week ago and created my first wallet, unfortunately I ran into an issue with my local node. FYI, my monerod version is 0.17.3.0-release It does not synchronize all ...
1 vote
1 answer
8k views

Coudn't connect to daemon

Wallet do not synchronizing because he couldn't connect to daemon. Win 10. Restore height is 2150000. I tried: Reinstall GUI (I had used latest version (17.4) before, but anyway) Start monerod Resync ...
0 votes
1 answer
1k views

Monero Forking Guide

I have been recommended to use the CryptoNote Forking guide (https://cryptonotestarter.org/inner.html) as a basis for Forking Monero. However, there are a number of differences. For example, the ...
0 votes
1 answer
30 views

What does monerod --tos-flag do?

monerod -h informs me that it sets TOS flag. What is TOS flag, what does it do? Where can I read more about it?
0 votes
0 answers
36 views

MDB_Corrupted, >monerod command always failing mid sync. Fails after arbitrary and different periods during each attempt

here is an example of my most recent error: 2024-04-19 05:38:20.807 I Synced 200392/3130513 (6%, 2930121 left) 2024-04-19 05:38:20.893 I Synced 200492/3130513 (6%, 2930021 left) 2024-04-19 05:38:20....
2 votes
1 answer
359 views

Using the rpc_access_data method Daemon RPC

Monerod command: monerod --rpc-bind-ip 0.0.0.0 --restricted-rpc --confirm-external-bind --public-node --rpc-payment-address xxxxx --rpc-payment-credits 250 --rpc-payment-difficulty 1000 Curl request:...
1 vote
1 answer
85 views

Your node is 2540154 blocks behind (9.7 years) - even though it is not?

I get this message that my node is 9.7 years behind even though it is at the current height. Does this just mean that this IP is trying to send me wrong block height data? LOG: IP.Address:18080[OUT] ...
0 votes
1 answer
884 views

Running a Monero node from a home PC with Broadband unlimited download over TOR. Doable?

I want to run a Monero node from home. My PC details: Processor Intel (R) Pentium (R) CPU N3700 @1.60GHz 1.60GHz RAM - 4 GB 64 bit operating system x64 based processor Total space 465 GB, Out ...
-1 votes
1 answer
99 views

How can I get Monero anonymously with Bitcoin or Etherium?

I want to get Monero, but not through my usual crypto exchange. What is the best place to get it without doing KYC? Preferably low fees and quickly.
0 votes
1 answer
245 views

Only 90% of Blockchain Downloads, Sync is Slow

I need(ed) to generate wallet addresses and being new to working with cryptocurrencies, the initial research I did about how to generate wallets (via the official documentation) told me that running a ...
0 votes
0 answers
11 views

How does --pad-transactions work with monerod? Is it only for txpool?

monerod -h informs me about this option: Pad relayed transactions to help defend against traffic volume analysis Is the miner then stripping such transaction out of padding before broadcasting it to ...
0 votes
1 answer
6k views

Why won't monerod.exe connect to daemon?

I have tried the following to get monerod.exe to work: placed all monero related folders in the exception section of my antivirus (AV originally quarantined and blocked several files) removed monerod....
2 votes
1 answer
153 views

Unrecognized TXN format, incorrect balance v0.13.0.4

this is the same error received in v0.13.0.3 GUI txn extra has unsupported format all transactions are pre fork by weeks, and is leading to an incorrect balance showing in my wallet. Re synced the ...
0 votes
1 answer
175 views

monerod v0.13.0.4 being killed / crashed randomly it seems

Below is the screenshot of when it got killed and also the bitmonero.log file. I started monerod with the command: ./monerod --block-sync-size 10 What could the issue be?
1 vote
1 answer
98 views

Clarification of monerod config defaults

I am trying to template the whole Monero config file. I can't figure out what the default of different variables are. From my understanding there are three different types of defaults, for example: ...
0 votes
1 answer
675 views

Decrypting payment Id of integrated address

I am using monero-nodejs liberary for rpc calls. I generated an integrated address and made a payment to this address. By splitting the integrated address, I could see the paymentId is ...
1 vote
1 answer
79 views

Universal pool configure mining wallet

We have created a mining pool with Monero as a universal pool. I want to know how long it will take to start digging and earn what is mined in my wallet.
0 votes
1 answer
657 views

Getting balance of my address connecting to a remote node via RPC API?

I'm looking to build a Monero web wallet, but I'm not sure how to go about querying the remote Monero nodes to get an updated balance of an address. Let's say I have the Monero private keys, how do I ...
0 votes
1 answer
79 views

Where does a full node store transaction data?

When using a remote node, the node owner can see IP addresses linked to txIDs. Running a full node means I can avoid trusting third parties and keep control over my data. But I can't find where this ...
0 votes
0 answers
65 views

Monerod created a transaction with no sender and 0 fee, still this transaction was confirmed

Somehow happend, that after regular request to the RPC for creating a new transaction, my local node created transaction that has no sender and 0 fee, but this transaction on current has over 6k ...
5 votes
2 answers
3k views

Blockchain synchronization fails, bus error

I am using monerod 0.10.3.1 on Arch Linux. Towards the end of the process the synchronization with the blockchain fails: 2017-05-29 09:20:27.451 [P2P1] WARN net.dns src/common/dns_utils.cpp:531 ...
5 votes
2 answers
1k views

Is the 10-block lock time a protocol rule? What rules accompany it?

Every Monero transaction consumes old outputs (used as inputs to the transaction) and creates new outputs. The new outputs are locked for 10 blocks before they can be spent. A. Is this a wallet ...
0 votes
0 answers
22 views

Wallet and Blockchain on different hard drives cant communicate

At my wits end. In breif my wallet is on C:/ and my lmdb is on D:/. The GUI tells me that it knows its location, D:/lmdb. Indeed that exactly where the program downloaded it to yet still I can not ...
0 votes
1 answer
30 views

Monero-Python connecting to Wallet error -13, can't find wallet

I have been trying for hours and get the basic python functions to work. I am trying to run daemon locally and using monero-wallet-rpc to connect the daemon. Any help would be greatly appreciated, ...
0 votes
0 answers
46 views

Monero directory vs .bitmonero lmdb

I have two folders, ~/monero and ~/.bitmonero In ~/monero/'~'/monero/.monero/lmdb (180gb~ data.mdb) with a recent file date, means it's being used and updated In ~/.bitmonero there's ~/.bitmonero/lmdb ...
0 votes
1 answer
37 views

Could anyone explain ge_frombytes_vartime for me?

Recently I am working on monero source code, and I wonder how monero verify ed25519 public key is invalid. Is this function converting the public key into Y coordinates, then calculating the X ...
0 votes
1 answer
42 views

genesis block mismatch when running two regtest nodes in a docker container

So, I run 2 monerod nodes in a docker container, and one of them is giving the following errors: 2024-01-17 08:14:12.500 [RPC0] ERROR net.p2p src/cryptonote_core/blockchain.cpp:2436 Client sent ...
5 votes
1 answer
554 views

Segmentation Fault problem when running monerod in whonix

The first time I ran monerod in whonix, everything worked perfectly. But everytime after that, when I try to start it up, everything looks normal (green line read: NET service bound to ...)(second ...
1 vote
1 answer
38 views

Monerod frequent error (duplicate key: support_flags)

I've been running a Monero node for over a year and suddenly started getting the error below. I re-installed monerod and downloaded a new blockchain, but still receiving this frequent error: 2023-09-...
0 votes
0 answers
44 views

monerod failed to parse block from blob and thus will not start

Monerod "failed to parse block from blob" and thus didn't start. Monero-gui-v0.18.3.1 Haven't really tried anything yet except attempting to start several times.
1 vote
1 answer
968 views

Slow blockchain sync

I'm trying to figure out why my Monero node is syncing so slowly. I have experience syncing other PoW nodes before (like BTC, for example), but it was never this slow (I've spent over 2-3 weeks at ...
18 votes
6 answers
13k views

How do I gracefully stop the monerod daemon process?

I started monerod as a background daemon with the --detach flag. Suppose I want to restart my computer, how do I gracefully stop the process? Can I just kill it? Thanks in advance.
0 votes
0 answers
71 views

Monero daemon incoming connections disabled even with open firewall - error : "Incoming connections disabled, enable them for full connectivity"

Heeeeeeeeeeyyyyyyyyyyyyyyyyyyyyyyaaaaaaaaaaaaaaaaaaaaaaaaaa guys, My monero daemon running on linux displays from time to time the message "Incoming connections disabled, enable them for full ...
0 votes
0 answers
21 views

Multisig: Can you add another party after finalize_multisig

Let's say i'm creating a 2/3 multisig but i only have 2 people, is it possible to create the multisig with only 2 people, then later i add the third person? and/or can you edit a multisig and change/...
1 vote
1 answer
50 views

How do I get notice of a Monero reorg and the transactions that were dropped/modified in those blocks?

In monerod, I see an example printout: BLOCK ADDED AS ALTERNATIVE ON HEIGHT ########## What is a recommended way to send information about this reorg to another program? The main use-case is detecting ...
0 votes
0 answers
22 views

Given the below payment model, how do I prevent my main wallet from being drained on my e-commerce store?

Via the wallet-rpc api An integrated address is generated for a one-time payment User pays to address User is refunded excess payments It is currently implemented like so: A walletRPC wrapper ...
0 votes
1 answer
38 views

Does the "get_payments" JSON RPC call respond with the "locked" value as true *only* if the confimations are below 10?

I am creating an e-commerce website that accepts monero using the monero JSON RPC API. I need to make sure the confirmations of a payment for any single order are equal to or above 10, I would like to ...
0 votes
1 answer
127 views

Monero payment processing & confirmation in PHP

I would like to create a payment gateway for the Monero crypto currency on my website. As practise, I don't want to use a third party payment processor. I was thinking JSON RPC calls would be a good ...
0 votes
0 answers
28 views

My balance of a address on my wallet RPC does not change [duplicate]

I am currently using Monero RPC with the stagenet. I have two addresses. Using a Monero stagenet faucet, I received 10 XMR, and everything works because my balance for the first address is 10,000,000,...
0 votes
2 answers
822 views

I set up my public node to use port 18089, but why does monerod keep trying to connect to port 18081?

I have a VPS and would like to run a public node and get it indexed by moneroworld to help the network. I made the necessary changes to monerod.conf to change the port to 18089 and to restrict things ...
0 votes
1 answer
254 views

Monerod - inital sync running for 7 days with 27% to go. Is this normal?

Running an initial node sync with Monerod on Windows 11 for testing purposes. Very log disk and CPU usage all the way through. Now 7 days into the download. The process is continuing to slow with 27% ...
0 votes
1 answer
494 views

How to connect monero-wallet-rpc with my local node?

My monero node is fully synced. I'm using Ubuntu. In my monero config file I added: Rpc-bind-ip=127.0.0.1 Rpc-bind-port=18081 Rpc-login=myusername:my password Then I started monero with ./monerod. On ...
0 votes
0 answers
10 views

zsh: segfault when trying to sync stagenet [duplicate]

I'm trying to sync a full node for stagenet using the monerod CLI tool on macOS 13.6. It syncs for some time but then it randomly segfaults and I'm not sure why. The error message is as follows: zsh: ...
0 votes
0 answers
8 views

funds not in the wallet - don't see my funds [duplicate]

I uninstalled my wallet because the daemon wouldn't start, now I installed it but I still don't see my funds

1
2 3 4 5
13