Skip to main content

Questions tagged [monerod]

Name of monero daemon (replacing bitmonerod) starting with the v0.10.0 - Wolfram Warptangent - release

Filter by
Sorted by
Tagged with
0 votes
0 answers
6 views

MDB_Corrupted, >monerod command always failing mid sync. Fails after arbitrary and different periods during each attempt

here is an example of my most recent error: 2024-04-19 05:38:20.807 I Synced 200392/3130513 (6%, 2930121 left) 2024-04-19 05:38:20.893 I Synced 200492/3130513 (6%, 2930021 left) 2024-04-19 05:38:20....
MoneroNodeOperator's user avatar
0 votes
0 answers
16 views

How do I run monerod exclusively over ip2 with i2pd (unreachable over clearnet)?

Following this tip, I launched my node with monerod --detach --prune-blockchain --tx-proxy i2p,127.0.0.1:8060 --add-peer core5hzivg4v5ttxbor4a3haja6dssksqsmiootlptnsrfsgwqqa.b32.i2p --add-peer ...
John Smith's user avatar
0 votes
1 answer
61 views

How can I get Monero anonymously with Bitcoin or Etherium?

I want to get Monero, but not through my usual crypto exchange. What is the best place to get it without doing KYC? Preferably low fees and quickly.
Chris Higgins's user avatar
1 vote
1 answer
44 views

Your node is 2540154 blocks behind (9.7 years) - even though it is not?

I get this message that my node is 9.7 years behind even though it is at the current height. Does this just mean that this IP is trying to send me wrong block height data? LOG: IP.Address:18080[OUT] ...
Pedro Lee's user avatar
0 votes
0 answers
18 views

Wallet and Blockchain on different hard drives cant communicate

At my wits end. In breif my wallet is on C:/ and my lmdb is on D:/. The GUI tells me that it knows its location, D:/lmdb. Indeed that exactly where the program downloaded it to yet still I can not ...
Shane Wheeler's user avatar
0 votes
0 answers
32 views

Monero directory vs .bitmonero lmdb

I have two folders, ~/monero and ~/.bitmonero In ~/monero/'~'/monero/.monero/lmdb (180gb~ data.mdb) with a recent file date, means it's being used and updated In ~/.bitmonero there's ~/.bitmonero/lmdb ...
HelloHonk's user avatar
1 vote
1 answer
76 views

Clarification of monerod config defaults

I am trying to template the whole Monero config file. I can't figure out what the default of different variables are. From my understanding there are three different types of defaults, for example: ...
ketchup_eater's user avatar
0 votes
0 answers
22 views

monerod failed to parse block from blob and thus will not start

Monerod "failed to parse block from blob" and thus didn't start. Monero-gui-v0.18.3.1 Haven't really tried anything yet except attempting to start several times.
Richard's user avatar
0 votes
1 answer
25 views

Monero-Python connecting to Wallet error -13, can't find wallet

I have been trying for hours and get the basic python functions to work. I am trying to run daemon locally and using monero-wallet-rpc to connect the daemon. Any help would be greatly appreciated, ...
user3810597's user avatar
0 votes
1 answer
512 views

Slow blockchain sync

I'm trying to figure out why my Monero node is syncing so slowly. I have experience syncing other PoW nodes before (like BTC, for example), but it was never this slow (I've spent over 2-3 weeks at ...
Tadej Gašparovič's user avatar
0 votes
1 answer
32 views

Could anyone explain ge_frombytes_vartime for me?

Recently I am working on monero source code, and I wonder how monero verify ed25519 public key is invalid. Is this function converting the public key into Y coordinates, then calculating the X ...
Harry's user avatar
  • 1
0 votes
1 answer
32 views

genesis block mismatch when running two regtest nodes in a docker container

So, I run 2 monerod nodes in a docker container, and one of them is giving the following errors: 2024-01-17 08:14:12.500 [RPC0] ERROR net.p2p src/cryptonote_core/blockchain.cpp:2436 Client sent ...
Meglio's user avatar
  • 101
0 votes
1 answer
19 views

monero regtest generateblocks returns status "BUSY"

I am running a Monero node in --regtest mode. generateblocks always returns status "BUSY". gen_info() does not say it is busy though.
Meglio's user avatar
  • 101
0 votes
0 answers
49 views

Monero daemon incoming connections disabled even with open firewall - error : "Incoming connections disabled, enable them for full connectivity"

Heeeeeeeeeeyyyyyyyyyyyyyyyyyyyyyyaaaaaaaaaaaaaaaaaaaaaaaaaa guys, My monero daemon running on linux displays from time to time the message "Incoming connections disabled, enable them for full ...
Get's user avatar
  • 1
0 votes
1 answer
160 views

Only 90% of Blockchain Downloads, Sync is Slow

I need(ed) to generate wallet addresses and being new to working with cryptocurrencies, the initial research I did about how to generate wallets (via the official documentation) told me that running a ...
adam-asdf's user avatar
  • 101
0 votes
0 answers
21 views

Multisig: Can you add another party after finalize_multisig

Let's say i'm creating a 2/3 multisig but i only have 2 people, is it possible to create the multisig with only 2 people, then later i add the third person? and/or can you edit a multisig and change/...
Ceddy Muhoza's user avatar
1 vote
1 answer
46 views

How do I get notice of a Monero reorg and the transactions that were dropped/modified in those blocks?

In monerod, I see an example printout: BLOCK ADDED AS ALTERNATIVE ON HEIGHT ########## What is a recommended way to send information about this reorg to another program? The main use-case is detecting ...
sgp's user avatar
  • 8,806
0 votes
0 answers
19 views

Given the below payment model, how do I prevent my main wallet from being drained on my e-commerce store?

Via the wallet-rpc api An integrated address is generated for a one-time payment User pays to address User is refunded excess payments It is currently implemented like so: A walletRPC wrapper ...
SynataxError's user avatar
0 votes
1 answer
38 views

Does the "get_payments" JSON RPC call respond with the "locked" value as true *only* if the confimations are below 10?

I am creating an e-commerce website that accepts monero using the monero JSON RPC API. I need to make sure the confirmations of a payment for any single order are equal to or above 10, I would like to ...
SynataxError's user avatar
0 votes
1 answer
87 views

Monero payment processing & confirmation in PHP

I would like to create a payment gateway for the Monero crypto currency on my website. As practise, I don't want to use a third party payment processor. I was thinking JSON RPC calls would be a good ...
SynataxError's user avatar
0 votes
0 answers
27 views

My balance of a address on my wallet RPC does not change [duplicate]

I am currently using Monero RPC with the stagenet. I have two addresses. Using a Monero stagenet faucet, I received 10 XMR, and everything works because my balance for the first address is 10,000,000,...
mxrvin.thiele's user avatar
0 votes
1 answer
201 views

Monerod - inital sync running for 7 days with 27% to go. Is this normal?

Running an initial node sync with Monerod on Windows 11 for testing purposes. Very log disk and CPU usage all the way through. Now 7 days into the download. The process is continuing to slow with 27% ...
bitcontroller's user avatar
0 votes
0 answers
61 views

Monerod created a transaction with no sender and 0 fee, still this transaction was confirmed

Somehow happend, that after regular request to the RPC for creating a new transaction, my local node created transaction that has no sender and 0 fee, but this transaction on current has over 6k ...
Ilya Tarasov's user avatar
0 votes
1 answer
370 views

How to connect monero-wallet-rpc with my local node?

My monero node is fully synced. I'm using Ubuntu. In my monero config file I added: Rpc-bind-ip=127.0.0.1 Rpc-bind-port=18081 Rpc-login=myusername:my password Then I started monero with ./monerod. On ...
rahi ahmed's user avatar
0 votes
0 answers
10 views

zsh: segfault when trying to sync stagenet [duplicate]

I'm trying to sync a full node for stagenet using the monerod CLI tool on macOS 13.6. It syncs for some time but then it randomly segfaults and I'm not sure why. The error message is as follows: zsh: ...
Cromulent's user avatar
  • 115
1 vote
1 answer
38 views

Monerod frequent error (duplicate key: support_flags)

I've been running a Monero node for over a year and suddenly started getting the error below. I re-installed monerod and downloaded a new blockchain, but still receiving this frequent error: 2023-09-...
Kristed44's user avatar
0 votes
0 answers
8 views

funds not in the wallet - don't see my funds [duplicate]

I uninstalled my wallet because the daemon wouldn't start, now I installed it but I still don't see my funds
regman's user avatar
  • 1
0 votes
0 answers
12 views

Please Help. -- GUI wallet Daemon failed to start and can't find log or monerod and I can't see my money [duplicate]

When I open the wallet I keep getting this message "Daemon failed to start. Check your wallet and daemon log for errors. You can also try starting monerod manually." I've scoured the monerod ...
regman's user avatar
  • 1
0 votes
1 answer
42 views

Switching blockchain locations on a Windows machine

strange thing happened. I am in the middle of syncing blockchain ~65%, and first decided to do it on a HDD. Apparently it needs a lot of random I/O - I can hear the disk working. It's going to take ...
Jurrer's user avatar
  • 3
1 vote
1 answer
88 views

Consistent Seg Fault at 2850800 blocks

I'm attempting to sync the monero blockchain using the monerod CLI on my M2 MacBook. However, every time the sync reaches 96% complete (2850800 blocks), the process errors with a segmentation fault. ...
armichaud's user avatar
0 votes
0 answers
59 views

Error sending Monero transactions to my daemon [tx used wrong inputs]

After several checks made with the help of the community here on Stack-Exchange, I was able to move forward with my problem. Now I have reached the point that the transactions are not sent even ...
AlexCav's user avatar
0 votes
0 answers
38 views

How to have list of incoming and outgoing tx given an address?

I have my full monero node and I'm trying to extrapolate from it, all the tx (incoming and outgoing) involving my address. Right now I'm using the monerojs library and scanning the blocks, the data I'...
AlexCav's user avatar
1 vote
0 answers
149 views

I survived a “Segmentation Fault” error on monerod while downloading the blockchain and I don’t know why

I’m not an expert on how to manage or use the Monero functions or routines, but something odd happened to me and I can’t wrap my head around why that happened or if this is some sort of bug. For ...
NotMyBox's user avatar
0 votes
1 answer
151 views

Setting the Monero blockchain location on macOS with monerod

I downloaded the macOS Monero GUI wallet and did a full node sync to an external SSD. I then started looking into the Monero CLI wallet and thought it would be useful for scripting some tasks. Now I ...
Cromulent's user avatar
  • 115
0 votes
1 answer
80 views

monerod.exe Inbound malicious attacks

I just installed Monero GUI Wallet for the first time and during the sync, I am getting a LOT of inbound malicious attacks. Malwarebytes is blocking them but why am I getting them? How is it that ...
JAMartin's user avatar
0 votes
1 answer
66 views

How does running a node benefit the network?

If I have the full node on my hard drive and the node daemon running, is there anything else I have to configure to benefit the Monero network? Do I have to configure a domain name for others to ...
skarz's user avatar
  • 101
3 votes
1 answer
66 views

Is Monero affected by the year 2038 / 2106 problem?

Unix timestamps usually are stored as a 32 bit integer, either signed or unsigned which will overflow either in 2038 or 2106. How are timestamps currently stored in Monero's codebase and blocks?
janowitz's user avatar
  • 2,681
0 votes
1 answer
77 views

Does compiling with `-march=native` bring a measurable performance improvement for mining?

I see in other questions people are sometimes using this flag, which enables all instruction subsets supported by the local machine. Does it bring a performance improvement? Are there some benchmarks ...
Petr's user avatar
  • 125
0 votes
1 answer
33 views

When running on a rotating harddrive benefit from LVM caching on a SSD?

With LVM it's possible to set up a fast caching SSD partition that speeds up a slow (usually rotating HDD) one: Creating LVM Cache Logical Volumes Would this alleviate slow performance of Monero ...
Petr's user avatar
  • 125
2 votes
1 answer
191 views

Does Monero require SSD for decent performance once it finishes the initial synchronization?

The warning in the logs The blockchain is on a rotating drive: this will be very slow, use an SSD if possible doesn't explain if just the synchronization will be slow, or also running the node ...
Petr's user avatar
  • 125
0 votes
1 answer
71 views

Where does a full node store transaction data?

When using a remote node, the node owner can see IP addresses linked to txIDs. Running a full node means I can avoid trusting third parties and keep control over my data. But I can't find where this ...
kj77's user avatar
  • 1
0 votes
0 answers
65 views

Monero daemon is not connecting to peers during initial sync

On a WIndows server 2016 machine, running monero 0.18.2.2-release. New to monero. Sorry if this is a basic thing but I've been troubleshooting this for 3 hours now. When I start monerod.exe even with ...
holasoygerman's user avatar
0 votes
1 answer
190 views

About bitmonero.conf

Please excuse if my question is stupid but with current monero daemon node running on Windows 11 i do NOT have a config file in default location C:\ProgramData\bitmonero So because of the reason that ...
Dinamitrii's user avatar
0 votes
1 answer
127 views

How connect to monerod via xmrig

I have a node running monerod. The "problem" i've that node with password and i don't know how to connect xmrig with login. I tried various combinations such -u -p, -O user:pass, -u user:...
Kurogane's user avatar
1 vote
1 answer
57 views

`generateblocks` method not found, when called via json-rpc

I am using Moner (Monero 'Fluorine Fermi' (v0.18.1.2-release)) on ubuntu. I am running a regtest with this .conf file and these command line flags: bitmonero.conf. # /etc/monero/monerod.conf #custom ...
Asad Hayat's user avatar
0 votes
1 answer
62 views

Facing an error when working with monero.fail (monero node tracker)

https://monero.fail/ This is the monero node tracker. https://github.com/lalanza808/monero.fail After following the steps to make the project work, I am facing an attribute error where the function ...
Mogambo's user avatar
0 votes
0 answers
156 views

How can I run monero node in LAN?

Sorry to bother. I'm new to Monero. Recently I followed this article (https://github.com/moneroexamples/private-testnet#step-2-start-first-node) to set up a private chain consist of three nodes. But ...
Harry's user avatar
  • 1
0 votes
2 answers
312 views

Let`s say that i sent monero from kucoin to my monero wallet. Is this transaction anonymous?

The kucoin account is registered to my official e-mail addres. Do i need to use monero mixer? Which monero mixers accept small amounts of this coin (eg $10). What are the anonymous ways to transfer ...
wever's user avatar
  • 1
1 vote
1 answer
40 views

Can someone explain me what is monero-blockchain-usage?

How can I access the monero-blockchain-usage and what is the use of it ? could someone explain after input our db what should I do ?
ZORO's user avatar
  • 11
0 votes
0 answers
204 views

Monero Wallet's blockchain data refuses to change location

I followed this guide down to a T, as I'm trying to move the blockchain to D:\Monero GUI Wallet\bitmonero. It seemingly worked fine and didn't show any errors, and now I've got the blockchain data in ...
gggggghhh's user avatar

1
2 3 4 5
13