Questions tagged [monero-wallet-rpc]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
11
votes
1answer
646 views

What is Kasisto?

What is Kasisto? Is there a demo available? Is it open source? If so where can I see the source code? Who is the developer? How can I become a beta tester?
6
votes
2answers
2k views

Wallet RPC API wallet creation

I decided to build a python GUI wrapper around monerod and monero-wallet-rpc. Following https://getmonero.org/knowledge-base/developer-guides/wallet-rpc and https://moneroexamples.github.io/python-...
5
votes
2answers
338 views

Difference between “Wallet” and “Account”

By looking at Moneropedia, words Account and Wallet may seem to be interchangeable, yet there are different methods for each at monero-wallet-rpc (e.g. create_wallet and create_account). So what's the ...
5
votes
2answers
572 views

What is the easiest way to get a notification for incoming transaction?

I tried to get a notification for an incoming transaction?? What is the best way? As I see, I have three options now. (Updated 02/20/2018) Make a script to check rpc log file. Then get wallet ...
4
votes
1answer
398 views

Funds received from subwallet are not showing

My wallet has approximately 60,000 subaddresses. I was running monero-wallet-rpc, and somehow (I think) the program was not able to save the wallet successfully. When I started monero-wallet-rpc ...
4
votes
1answer
2k views

As of 0.10.1.0, how do you use monero-wallet-rpc?

Once updating to version 0.10.1.0, in addition to monero-wallet-cli, there is monero-wallet-rpc. What is the difference in usage between the two? What type of commands/arguments that were run ...
4
votes
1answer
154 views

Are there certain characters unsuitable for passwords?

There has been a push in recent years (or maybe we're even past that push now, and everyone pretty much knows the importance) to use complex passwords with not just numbers and a mix of uppercase and ...
4
votes
3answers
278 views

How to close a wallet without stopping the RPC server?

I am trying to use RPC to perform such actions as: Check balance and make transfers using selected wallet The needed wallet should be unlocked just before any tranfer and locked immediately after ...
3
votes
1answer
703 views

How to communicate programmatically with the Monero CLI wallet using php?

I have installed my Monero CLI wallet on my Amazon server with this help. I want to communicate with this wallet using php. I tried with this library but it is not connecting properly. Can anyone ...
3
votes
2answers
707 views

Monero Testnet Faucet

How to run monero node in testnet mode for testing purpose and how to get testnet coin? Is there any testnet online portal for testing?
3
votes
1answer
310 views

Multiple Users Per Node Via JSON RPC

I have been looking at the JSON RPC Api for connecting to a Node. Can a node support multiple users connecting to it, all with individual wallets...? I've been looking at https://getmonero.org/...
3
votes
1answer
54 views

Suggestions on how to consistently get more outputs?

I've got a service that frequently runs out of outputs. For this service, sending a heavily split transaction back to my wallet is not practical. Ideally, I would want something like the my return ...
3
votes
1answer
2k views

Run monero-wallet-rpc in background in Ubuntu?

Is there a flag that i can pass to monero-wallet-rpc so it runs in the background? I tried --detach since thats used in monerod but it didn't work. Any unofficial way to do it easily? I am running ...
3
votes
1answer
137 views

Error when trying to run monero-wallet-rpc with docker-compose up

I provide user and password in config file, but I got the error as it tries to create .login file. When I run for the first time it runs without restriction, but when I run for the second time, it ...
3
votes
1answer
285 views

How do I set transaction priority with the JSON RPC wallet?

I'm trying to find how to set the payment priority when making a transfer using the JSON RPC wallet, but can't find the parameter in the documentation, probably because it hasn't been updated since ...
3
votes
1answer
30 views

How do I get the account_index parameter for the wallet RPC?

I am using the Monero wallet RPC method get_balance to get my wallet balance. One of the inputs is account_index, which is described as: account_index - unsigned int; Return balance for this ...
3
votes
1answer
892 views

What is the correct way to make a systemd service file for monero-wallet-rpc

I want to setup monero-wallet-rpc as a systemd service. I have attempted to do this with my minimal systemd experience, however I am having some issues. When I start the service I am not returned to ...
3
votes
0answers
217 views

How can I set monero-wallet-rpc default password

I want to set a permanent monero-wallet-rpc password. Right now every time I run monero-wallet-rpc I am asked to define a password. How can I make this password be permanent?
2
votes
2answers
49 views

Generate a wallet file from a spend key in the command line using the CLI wallet in a “non-interactive” way for scripting purpose

I have a monero spend key and I want to generate a new wallet file using the CLI, but I want to do it in an non-interactive way so I can use this same command in my scripts. I tried doing: monero-...
2
votes
2answers
455 views

Is there a monerod config file to change certain settings when you run monerod in linux?

I'm looking to change the default port of monerod for RPC, but I wasn't sure is there a monerod hidden config file I can put in my home folder to set the settings? And what other useful settings are ...
2
votes
1answer
61 views

What is the difference between transfer_split and transfer?

Using the monero-wallet-rpc program, from the documentation, I can't understand the difference between transfer and transfer_split. When should I use transfer and when should I use transfer_split? ...
2
votes
1answer
209 views

Is automated churning of XMR bad for privacy?

I've recently been learning a bit of Python and decided to try writing a couple of scripts for one of my favorite open source projects: Monero! I've written a script that runs on a sleep timer and ...
2
votes
1answer
81 views

Consistency failure in amounts received

When I tried to send the amount from my wallet. monero-wallet-rpc throws 2018-10-20 10:58:22.492 7f6906cab780 WARN global src/wallet/wallet2.cpp:1511 Consistency failure in amounts ...
2
votes
1answer
415 views

Multiple different wallets connected to same monero node

I'm trying to connect multiple wallet-RPC to the same monero node. I have started two separated terminals in order to test the setup and started it with the following command: ./monero-wallet-rpc --...
2
votes
1answer
1k views

monero-wallet-rpc not working for curl

I'm using curl to request from the monero-wallet-rpc, but somehow it does not recognize the user/password. I used the following command curl -u user:password -X POST http://127.0.0.1:8082/json_rpc ...
2
votes
1answer
22 views

tx-notify being triggered 2 times per transaction

I'm using tx-notify with the monero-wallet-rpc and am having issues understanding the logic behind when tx-notify is triggered. Right now from what I've experienced so far, tx-notify is triggered ...
2
votes
1answer
53 views

Can I look for incoming transactions with only my private view key?

I have a wallet and without using Monero Wallet GUI, I want to check for incoming transactions every 5 minutes. For that, I will write code (in .NET), that will execute a method every 5 minutes. ...
2
votes
1answer
88 views

How to get the balance of an integrated address?

As an integrated address is different from a subaddress and account hierarchy, how do I get the balance of an integrated address?
2
votes
1answer
41 views

Can a new participant be added onto a multisisg 2/3 scheme?

Once a multisig wallet is created with a specific scheme, can a new participant be added, or does a new multisig wallet need to be made? The same question for if a participant can be removed?
2
votes
1answer
74 views

How to restore Monero RPC Wallet from seed

I would like to use the seed to restore wallet from RPC. However, I couldn't find it in this RPC command list below. https://www.getmonero.org/resources/developer-guides/wallet-rpc.html#...
2
votes
2answers
85 views

Are the developer's guides outdated?

I was trying to find docs about how to create a new subaddress using the CLI wallet RPC but it seems that dev guides at https://getmonero.org/resources/developer-guides/ are not updated to reflect 0....
2
votes
1answer
869 views

How to create multiple addresses in a single wallet using Monero-JSON-RPC?

I have few questions related monero payment gateway. 1.) If I want to create more than one address in single wallet using JSON-RPC, then how to do it? I have created integrated address but it does ...
2
votes
2answers
938 views

How to run monero-wallet-rpc in background without revealing my password to the server?

I know that I can run the Monero RPC wallet in the background on Ubuntu by adding a & to the command or by using setsid. But that would result in me having to use the following code on the ...
2
votes
3answers
367 views

Is there a way to make unsigned transaction, sign and submit manually using wallet RPC?

I want to make unsigned transactions, sign and submit manually using wallet RPC. I know that transfer method does them directly, but I want to do it separately. However I can't find the way using ...
2
votes
1answer
899 views

wallet rpc call login parameter format please?

I have been using monero-wallet-rpc with --disable-rpc-login so far with success, but would like to start authenticating my calls. Can someone please post what the username and password fields are ...
2
votes
1answer
63 views

How to access to monero rpc from https javascript

I wrote a small javascript to test digest authentication on monerod and monero-wallet-rpc. When running on a http (no tls) website, authentication works, and I get my response. Then trying the same ...
2
votes
1answer
61 views

Using sneurlax/monerojs and I'm having a problem connecting to wallet

Here is my code: const Monero = require('monerojs'); var daemonRPC = new Monero.daemonRPC({ autoconnect: true }) .then((daemon) => { daemonRPC = daemon; // Store daemon interface in global ...
2
votes
1answer
56 views

Digest Authentication in monero-wallet-rpc

I have an application and I want to connect it to my Monero wallet. I can use curl to access the wallet using --digest but my app can't use curl. I am using jsonrpc in Ruby and I can make the call to ...
2
votes
1answer
356 views

Monero RPC send transaction from address

I used the following command to pass a monero transaction with the daemon : {"jsonrpc":"2.0","id":"0","method":"transfer","params":{"account_index":2,"destinations":[{"amount":100000000,"address":"...
2
votes
1answer
212 views

Proper usage of 'unlock_time' in Monero Wallet RPC

My question is regarding the lock time of monero transactions. If I want to send transactions from one subaddress/account to another within the same wallet, is it at all possible to set the '...
2
votes
0answers
591 views

RPC will not connect to daemon

I attempted to run the Monero RPC, but I am not able to connect to the daemon on either my VPS, which is running a synchronized daemon, or on my Windows PC. This is what happened I started by ...
2
votes
0answers
290 views

Monero wallet RPC don't work

I have a huge problem with the RPC wallet. It starts ok, tried - - log-level 4 and all goes OK but it does not bind on the RPC port and I cannot send RPC commands. It just stops at Starting RPC server....
2
votes
0answers
968 views

Wallet-RPC can't connect to remote node [closed]

I'm trying to connect wallet-rpc to a remote node but I get an error: Wallet initialization failed: no connection to daemon The remote node is: node.moneroworld.com:18089 This is the command that ...
1
vote
1answer
135 views

Where can I find Monero public RPC nodes I can connect to?

Is there a public list of public monero RPC nodes I can use for testing purposes?
1
vote
1answer
997 views

What is the monero-wallet-rpc/deamon-rpc?

What are they used for? *These belong is from someone who asked in a chat and I'm curious. What does it mean http request? Does that mean it gets information directly from a website?
1
vote
1answer
75 views

Security concerning private keys on monerowallet rpc on hosted server if taking monero payments

My query is about the security - or lack thereof - of private view keys when they are placed on a server (web host) as part of a payment integration system to accept Monero payments from customers. As ...
1
vote
1answer
441 views

Error using monero-wallet-rpc: No wallet file

I am trying to use monerod and monero-wallet-rpc to run RPC commands to my Monero daemon with curl. I have run monerod and monero-wallet-rpc in the following way: 1) ./monerod ... You are now ...
1
vote
2answers
106 views

Querying wallet RPC about whether a wallet is view-only?

I would like to use the Wallet RPC API to determine if the wallet I am connecting to is view-only. I'm thinking about using the query_key command with key_type=mnemonic. Is it safe to assume that if ...
1
vote
1answer
37 views

Multisig requires new wallet or new address?

I'm following the information here but hoping to save some troubleshooting time. It says "First, the wallet to be converted to multisig must be empty. It is best to use a brand-new walllet for the ...
1
vote
1answer
34 views

RPC 'create_address' after restart daemon creates same addresses again

When I restart the daemon the method 'create_address' somehow cycles already used addresses (not used as in received monero but already created before). is there a way to prevent the daemon from ...