Stack Exchange Network

Stack Exchange network consists of 174 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange
Join us in building a kind, collaborative learning community via our updated Code of Conduct.

The tag has no usage guidance.

1
vote
0answers
31 views

Monero transaction rpc call doesn't return any result for the payment ID

I have a monero address (say ABC) with some balance in it.I need to initiate a transaction to the same ABC address with different payment ID (16 bit) to differentiate for a purpose. I did the ...
0
votes
1answer
22 views

Monerd error on rpc-bind to make a public node

I set my rpc-bind-ip=x.x.x.x in my bitmonero.conf file and used my public IP addres. But I am getting this error: ERROR default src/rpc/rpc_args.cpp:80 --rpc-bind-ip permits inbound unencrypted ...
0
votes
1answer
20 views

Is there a .monerd config file to change certain settings when you run monerod in linux?

I'm looking to change the default port of monerod for rpc, but i wasn't sure is there a .monerod hidden config file I can put in my home folder to make the settings? And what other usefule settings ...
1
vote
1answer
46 views

Monero RPC send transaction from address

I used the following command to pass a monero transaction with the daemon : {"jsonrpc":"2.0","id":"0","method":"transfer","params":{"account_index":2,"destinations":[{"amount":100000000,"address":"...
1
vote
1answer
54 views

Check balance of an address by Monero RPC

In monero RPC, to consult the balance of a wallet we used the following command: "{"jsonrpc":"2.0","id":"0","method":"getbalance"}" How then we will do to consult the balance of an address belonging ...
0
votes
1answer
51 views

Unauthorized access when calling monero-wallet-rpc

I configured the monero RPC with the following command lines: 1/ Firstly I run the monero daemon : ./monerod --testnet --rpc-bind-ip=x.x.x.x --rpc-bind-port=28081 --rpc- login user:password -...
0
votes
1answer
36 views

Can't connect to my full node outside my local network

I've been having trouble connecting to my monero remote note from outside my local network. This is the command I've been using to launch the deamon monerod.exe --data-dir E:/bitmonero --rpc-bind-...
0
votes
1answer
52 views

Get notified about a new block on monero blockchain

Is there any method other than polling , to subscribe to new block being published on the monero network? I want to get notified whenever a new block is published on the network on my app.
0
votes
0answers
18 views

cannot see my coins in my wallet [duplicate]

I am new to this and I purchased my first ever Monero over the weekend. I sent it to Moneor GUI wallet. Its been 2 days and I cannot see the coins in my wallet. I bought the coins from Coinspot ...
0
votes
1answer
81 views

Getting balance of my address connecting to a remote node via RPC API?

I'm looking to build a Monero web wallet, but I'm not sure how to go about querying the remote Monero nodes to get an updated balance of an address. Let's say I have the Monero private keys, how do I ...
1
vote
1answer
134 views

Monero Testnet Faucet

How to run monero node in testnet mode for testing purpose and how to get testnet coin? Is there any testnet online portal for testing?
0
votes
0answers
9 views

GUI Block Height greater than Block Chain? [duplicate]

So I sent some Monera over to my GUI wallet about an hour ago and it's still not showing up. Checked the block chain and the transaction has gone through, so thought something may be up with my GUI ...
0
votes
2answers
121 views

Method not found Monero JSON-RPC PHP

Fatal error: Uncaught RuntimeException: Request have return error: Method not found; Request: {"jsonrpc":"2.0","method":"getblockcount","params":null,"id":1}; in jsonRPCClient.php:166 I don't know ...
0
votes
1answer
13 views

add_address_book does not save after closing wallet

I am trying to work with the add_address_bookfunction https://getmonero.org/resources/developer-guides/wallet-rpc.html#add_address_book I have noticed that I can add and get the addresses, but when I ...
2
votes
1answer
56 views

Proper usage of 'unlock_time' in Monero Wallet RPC

My question is regarding the lock time of monero transactions. If I want to send transactions from one subaddress/account to another within the same wallet, is it at all possible to set the '...
1
vote
1answer
96 views

How to run Monero-wallet-rpc on windows?

I downloaded monero-cli for windows, I double clicked monerod, when its synchronised I double clicked monero-wallet-cli, I created wallet, then I clicked monero-wallet-rpc, it gets closed within a ...
1
vote
1answer
114 views

monero-wallet-rpc: Transfer from sub-account?

Is there an API call to transfer Monero from a specific sub-account? "Transfer" API (https://getmonero.org/resources/developer-guides/wallet-rpc.html#transfer) does not appear to ask for a sub-...
0
votes
0answers
21 views

monero json rpc get progress of rescan_blockchain

I am using the wallet RPC commands when I use the rescan_blockchain command, how can I get the current height. For example the cli will show 100/1000 then 150/1000 I thought I could just use the ...
1
vote
2answers
66 views

Are the developer's guides outdated?

I was trying to find docs about how to create a new subaddress using the CLI wallet RPC but it seems that dev guides at https://getmonero.org/resources/developer-guides/ are not updated to reflect 0....
1
vote
1answer
72 views

Wallet RPC (transfer): Empty Transaction Key (tx_key) received

I run into an issue where when submitting an RPC request to the transfer method, the tx_key (that helps prove a tx was made) is not being returned. I explicitly mention get_tx_key so that the tx_key ...
0
votes
0answers
40 views

Error when trying to run monero-wallet-rpc with docker-compose up

I provide user and password in config file, but I got the error as it tries to create .login file. When I run for the first time it runs without restriction, but when I run for the second time, it ...
0
votes
0answers
22 views

Does not monero-wallet-rpc support 'export_outputs' method?

With monero-wallet-cli I can do offline signing referring follows Is there any way to construct a transaction manually?. But how can I do that with monero-wallet-rpc in program? It seems monero-...
0
votes
0answers
116 views

failed to get output distribution, request = Distribution size too small

monero-wallet-rpc can not send funds on a pool cause this error: failed to get output distribution, request = Distribution size too small segregation_fork_height - d.start_height >= d....
0
votes
0answers
33 views

Monero address validation [duplicate]

I am trying to start an exchange. When testing i came to a minor bumb when it comes to validating an address. Monero addresses may seem random, but they have the following details in common: ...
1
vote
0answers
113 views

How to receive balance change notifications?

Few days ago I asked on IRC how to receive notifications about incoming transactions and was pointed out that it's possible to do via freshly added 0MQ protocol. Looking through the PR I didn't ...
1
vote
0answers
254 views

RPC will not connect to daemon

I attempted to run the Monero RPC, but I am not able to connect to the daemon on either my VPS, which is running a synchronized daemon, or on my Windows PC. This is what happened I started by ...
2
votes
1answer
335 views

How to create multiple addresses in a single wallet using Monero-JSON-RPC?

I have few questions related monero payment gateway. 1.) If I want to create more than one address in single wallet using JSON-RPC, then how to do it? I have created integrated address but it does ...
4
votes
1answer
169 views

What is the easiest way to get a notification for incoming transaction?

I tried to get a notification for an incoming transaction?? What is the best way? As I see, I have three options now. (Updated 02/20/2018) Make a script to check rpc log file. Then get wallet ...
4
votes
1answer
102 views

How to close wallet without stopping rpc server?

I am trying to use RPC to perform such actions as: Check balance and make transfers using selected wallet The needed wallet should be unlocked just before any tranfer and locked immediately after ...
1
vote
1answer
557 views

How to run monero-wallet-rpc in background without revealing my password to the server?

I know that I can run the rpc wallet in the background on Ubuntu by adding a & to the command or by using setsid. But that would result in me having to use following code on the command line: ./...
3
votes
1answer
354 views

How to communicate programmatically with the Monero CLI wallet using php?

I have installed my Monero CLI wallet on my Amazon server with this help. I want to communicate with this wallet using php. I tried with this library but it is not connecting properly. Can anyone ...
1
vote
0answers
218 views

Monero wallet RPC don't work

I have a huge problem with the RPC wallet. It starts ok, tried - - log-level 4 and all goes OK but it does not bind on the RPC port and I cannot send RPC commands. It just stops at Starting RPC server....
0
votes
0answers
64 views

Is there a way to sign_transfer a tx_blob returned by transfer command from rpc call?

If I send this command to a view-only wallet rpc instance, how can I "sign_transfer" it so I can submit it? I tried pasting the tx_blob into a file and running sign_transfer with cli wallet. I'm ...
2
votes
0answers
538 views

Wallet-RPC can't connect to remote node [closed]

I'm trying to connect wallet-rpc to a remote node but I get an error: Wallet initialization failed: no connection to daemon The remote node is: node.moneroworld.com:18089 This is the command that ...
3
votes
1answer
258 views

Multiple different wallets connected to same monero node

I'm trying to connect multiple wallet-RPC to the same monero node. I have started two separated terminals in order to test the setup and started it with the following command: ./monero-wallet-rpc --...
0
votes
1answer
323 views

Failed to parse transaction from blob; failed to validate transaction from daemon

I'm trying to run on testnet using: ./monero-wallet-rpc --wallet-file MyWallet --daemon-address testnet.xmrchain.net:28081 --rpc-bind-port 28081 --testnet --disable-rpc-login I tried getting testnet ...
2
votes
3answers
178 views

Is there a way to make unsigned transaction, sign and submit manually using wallet RPC?

I want to make unsigned transactions, sign and submit manually using wallet RPC. I know that transfer method does them directly, but I want to do it separately. However I can't find the way using ...
2
votes
0answers
156 views

How can I set monero-wallet-rpc default password

I want to set a permanent monero-wallet-rpc password. Right now every time I run monero-wallet-rpc I am asked to define a password. How can I make this password be permanent?
0
votes
0answers
84 views

How do I get integrated_adress from transaction payment_id?

I'm using get_transfers method to get all tranasctions in wallet: https://getmonero.org/resources/developer-guides/wallet-rpc.html#get_transfers Every transaction returns me a payment_id. But this ...
1
vote
1answer
882 views

Getting “Unauthorized Access” with RPC (using Python Requests)

I can successfully do a getbalance RPC with digest authentication, e.g.: url = "http://localhost:18082/json_rpc" headers = {'content-type': 'application/json'} rpc_input = { "method": "...
0
votes
0answers
205 views

Need help, transaction fails with error: “original_output_index too large”

I'm a pool operator, and for the first time tonight, I got this error while trying to send a payout to miners: Error with transfer RPC request to wallet daemon {"code":-4,"message":"...
1
vote
1answer
105 views

Is there a monero-wallet-rpc call that can sign/verify a message?

I was wondering if there is such a call in the code, which has not been documented yet.
3
votes
1answer
245 views

Multiple Users Per Node Via JSON RPC

I have been looking at the JSON RPC Api for connecting to a Node. Can a node support multiple users connecting to it, all with individual wallets...? I've been looking at https://getmonero.org/...
2
votes
1answer
694 views

monero-wallet-rpc not working for curl

I'm using curl to request from the monero-wallet-rpc, but somehow it does not recognize the user/password. I used the following command curl -u user:password -X POST http://127.0.0.1:8082/json_rpc ...
3
votes
1answer
219 views

How do I set transaction priority with the JSON RPC wallet?

I'm trying to find how to set the payment priority when making a transfer using the JSON RPC wallet, but can't find the parameter in the documentation, probably because it hasn't been updated since ...
4
votes
1answer
121 views

Are there certain characters unsuitable for passwords?

There has been a push in recent years (or maybe we're even past that push now, and everyone pretty much knows the importance) to use complex passwords with not just numbers and a mix of uppercase and ...
10
votes
1answer
554 views

What is Kasisto?

What is Kasisto? Is there a demo available? Is it open source? If so where can I see the source code? Who is the developer? How can I become a beta tester?
3
votes
1answer
667 views

wallet rpc call login parameter format please?

I have been using monero-wallet-rpc with --disable-rpc-login so far with success, but would like to start authenticating my calls. Can someone please post what the username and password fields are ...
2
votes
1answer
1k views

Run monero-wallet-rpc in background in Ubuntu?

Is there a flag that i can pass to monero-wallet-rpc so it runs in the background? I tried --detach since thats used in monerod but it didn't work. Any unofficial way to do it easily? I am running ...
2
votes
1answer
597 views

What is the correct way to make a systemd service file for monero-wallet-rpc

I want to setup monero-wallet-rpc as a systemd service. I have attempted to do this with my minimal systemd experience, however I am having some issues. When I start the service I am not returned to ...