Questions tagged [monero-wallet-gui]

The official Monero Graphical User Interface maintained by the Monero Core Team.

111 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
4
votes
0answers
511 views

Why does the address change after putting it in the GUI wallet's address book?

I used the GUI wallet's address book to store an address. When I added the address, the address was changed. It went from 4Gdo... to 46w8M... the monero was sent and is confirmed on the blockchain, ...
4
votes
0answers
449 views

Missing payment to my Monero Core GUI

I would really appreciate your help in understanding whats happened to a transaction of mine. Ok, so the details: I used Exodus Wallet to send DASH to Shapeshift, in order to Exchange for Monero. I ...
3
votes
0answers
153 views

Monero GUI wallet address in combination with the Ledger Nano S

I installed the Monero GUI wallet on my laptop. When I open the wallet and plug in my Ledger Nano S, I see an address on my Ledger Nano S which is different from the receiving address in the Monero ...
3
votes
1answer
103 views

Unrecognized TXN format, incorrect balance v0.13.0.4

this is the same error received in v0.13.0.3 GUI txn extra has unsupported format all transactions are pre fork by weeks, and is leading to an incorrect balance showing in my wallet. Re synced the ...
3
votes
0answers
640 views

XMR sent from Kraken not visible in wallet

I'm new to Monero, so please use the most basic explanations. Thanks! I've sent XMR from Kraken exchange to my Gui wallet a while ago, using an integrated adress. Only I didn't notice that my wallet ...
3
votes
0answers
445 views

Importing Wallet into new GUI

So I created a wallet a few weeks back, before the GUI came out. And transported it via the keys file into the GUI. However now the wallet is empty. Waited for the blockchain to synchronize... ...
2
votes
0answers
239 views

Problem with the Monero GUI Wallet and multiple transactions

I have had the issue where I was trialing sending transactions between my own accounts. I have bought a Ledger NANO S and I was trying it out for the first time. For background, I'm not an ...
2
votes
1answer
240 views

Explanation of the Monero Daemon running arguments

I started the monero daemon via the GUI on Mac OS X. I downloaded the binary unpacked from monero-gui-mac-x64-v0.12.0.0.tar.bz2. When I do a simple $ ps aux | grep monero from the command line I get ...
2
votes
0answers
198 views

Monero withdrawal from gate.io on showing in wallet

Hi I'm very new to using monero and have a problem. I purchased some monero from Gate.io in late December and my funds is still not in my GUI wallet. Gate.io transaction history show the transaction ...
2
votes
0answers
791 views

Monero GUI - See the mining in progress

I am not interested in joining a pool nor buying fancy hardware. I just want to mine on my macbook in the background, and play my luck. I've installed the official Monero GUI app, and it's mining ...
2
votes
0answers
2k views

Monero Wallet Gui not connecting to remote node

I have a problem with the Monero Wallet gui v0.11.1.0. After opening the wallet, I go to Setting and make sure that the daemon is stopped. Then in the Daemon address fields I have node.moneroworld.com ...
2
votes
0answers
795 views

XMR withdrawal from Bittrex not showing up in GUI Wallet

Recently downloaded the GUI wallet and sent some XMR from Bittrex. Transaction says completed from Bittrex; I checked the tx id on monerohash.com and it shows 56 confirmations. Daemon appears to be ...
2
votes
0answers
115 views

Can the GUI daemon and the CLI daemon share the same data-dir at the same time?

Can the GUI daemon and the CLI daemon share the same data-dir at the same time? Both running simultaneously?
2
votes
0answers
2k views

GUI Wallet and Daemon?

It's not clear to me whether just opening the GUI wallet and pushing "start daemon" is all one needs to do, or if you also need to run the monerod.exe program? At times I believe I have only opened ...
2
votes
0answers
447 views

Running the GUI on Windows 7 (x64) - Connected daemon is not compatible with GUI

I run the monero-wallet-gui.exe file on Win 7 x64. I am then told that the daemon is not running. I click the start daemon button and it crashes. Then I get the "Connected daemon is not compatible ...
1
vote
1answer
62 views

Problem: Daemon failed to start. Timed out, local node is not responding after 120 seconds

Unable to sync in the last week. Assume this could be network issues you are having. Please advise. GUI version 0.17.1.7 and Ledger nano s ver 1.6.1.
1
vote
0answers
44 views

GUI Wallet balance = 0 although wallet is synchronised and Daemon is synchronized (2240487) using Remote node

Please help! I didn't check my Monero account for a while and now I am unable to login to my GUI wallet anymore. After researching the issue, I decided to delete everything related to Monero on my ...
1
vote
1answer
57 views

Monero GUI not recognising my Ledger X anymore…how can I get it to remember?

I set up my Ledger X successfully back in May 2020 and decided against setting up a password for simplicity's sake. I recently updated to the new MUI 0.17.1.4 - Oxygen Orion in preparation for the ...
1
vote
1answer
262 views

Coudn't connect to daemon

Wallet do not synchronizing because he couldn't connect to daemon. Win 10. Restore height is 2150000. I tried: Reinstall GUI (I had used latest version (17.4) before, but anyway) Start monerod Resync ...
1
vote
0answers
206 views

XMR funds not showing up in my Wallet

Yesterday using the Changelly Exchange I traded BTC for XMR. The transaction said it was completed successfully but the Monero never ended up in my wallet. I contacted the Changelly exchange and they ...
1
vote
0answers
59 views

Monero Wallet GUI cannot be opened in MacOS Catalina

Hi, I am trying to install the Monero Wallet GUI on my Mac (with latest OS Catalina 10.15.6), but after downloading, and I assume installing, when I double click the on the wallet icon (After adding ...
1
vote
1answer
78 views

After Ledger 1.6 update and GUI Nitrogen Nebula upgrade, Can't open Nano wallet

In my low tech thinking, I upgraded to Nitrogen Nebula GUI and Ledger XMR v1.6.0 update. Now I can't get the Nano S wallet to open. Got an error 1:11415. There are other posts saying to go back to ...
1
vote
1answer
87 views

How to conduct E-commerce transactions, XMR to GBP and conversion to fiat without KYC registration documents

I'd be grateful for some advice and help. I’m not a web developer and have basic knowledge of html and even less of crypto language. What I want to do is sell items on a website where customers pay ...
1
vote
1answer
255 views

Is my monero safe?

I sent Monero to an address which was shown in my GUI Wallet, but I think I haven't finished setting up the wallet... should the address start with 4 or 8? Also, is it safe if I don't yet see my total ...
1
vote
0answers
24 views

What are the official Twitter accounts for the main Monero developers?

I need some help because I’m uncertain about my search results.
1
vote
1answer
765 views

Please Help! — GUI wallet Daemon failed to start and can't find log or monerod

I'm running the GUI wallet v0.15.0.2 with a Ledger Nano S (the Ledger is updated as of yesterday) on a mac. When I open the wallet I keep getting this message "Daemon failed to start. Please check ...
1
vote
1answer
158 views

Creating Monero payment buttons which convert USD to Monero, customers pays and monero sent to my wallet

I have been looking at the developers sections for a solution. Is it possible to create a payment button for Monero similar to Paypal for an e-commerce website and have the monero sent to my GUI ...
1
vote
1answer
980 views

If you install Monero GUI over Tails, should you install the blockchain on same drive as Tails

I plan to use Tails to install the Monero GUI on a Win 10 PC and then download the blockchain to run a full Monero node.I plan to always use Monero over Tails, The Tails OS will be stored on 32GB USB ...
1
vote
2answers
720 views

Benefits of running a Monero GUI and full node over Raspberry PI with Tails rather than on home PC

I am setting up a Monero GUI on TAILS on a home PC or laptop and will run a full node with cold wallet but need some info about setting up on a Raspberry PI which I may do instead. I've seen the term '...
1
vote
1answer
1k views

Why won't monerod.exe connect to daemon?

I have tried the following to get monerod.exe to work: placed all monero related folders in the exception section of my antivirus (AV originally quarantined and blocked several files) removed monerod....
1
vote
0answers
121 views

Why does my pc not connect to Monero download page?

I am trying to download Monero 64-bit installer for windows from the following page https://downloads.getmonero.org/gui/win64install but I get the following error when I click on the link. This site ...
1
vote
0answers
36 views

Convert wallet from remote to local

Is it possible to convert my wallet from remote node to local node, without having to move my coins?? If so, how? Thanks in advance!!
1
vote
1answer
669 views

Remote Node, Full Nodes, etc

Q1: My first question surrounds wallets for Monero. I have come to understand that remote nodes can be tracking your IP address and hence are not secure. Would light weight wallets like MyMonero APP ...
1
vote
0answers
37 views

Swiping an NFC implant / chip

Can any Monero wallet be used for swiping an NFC chip? I currently use Mycelium for swiping an NFC implanted chip. After inputting the BIP38 passphrase, I can spend funds. Can any Monero wallet be ...
1
vote
0answers
100 views

Why does the Monero GUI wallet not save the daemon flags?

The Monero GUI wallet is not saving daemon flags on my system, Ubuntu 18.04. Also, there is no more start daemon button.
1
vote
0answers
249 views

Can't open GUI wallet with Ledger Nano S after 1.5.5 firmware update

Recently I updated my Ledger Nano S with the 1.5.5 version of firmware. After typing in the GUI password, I am asked to press tick (confirm) button on my Nano S - "Export Key" - in order to open the ...
1
vote
0answers
147 views

Why did I get an 'using an untrusted daemon' warning?

I'm running a full node and I followed every security step to set up the node on my computer. Everything was going great until today when I realized that a view-only wallet created the day before was ...
1
vote
0answers
220 views

Monero GUI is unable to start monerod on Ubuntu 18.04

I just installed the Monero GUI 0.13.0.4 Beryllium Bullet on Ubuntu 18.04, and I also installed the libhidapi-libusb library. When I start the Monero GUI, it fails to start the daemon. The logs ...
1
vote
0answers
69 views

Monero GUI is unable to finish the synchronization

The Monero GUI (updated) suddenly stopped synching and stuck on the last 30 blocks or so. Here the log: https://paste.fedoraproject.org/paste/uguNJ3qVqHmdvFvpc-vyOQ What can I do to solve this ...
1
vote
0answers
127 views

Running the GUI wallet connected to a daemon on my home network - How do I mark the daemon as 'trusted'?

I'm using the GUI wallet on my windows desktop but run a daemon on a small linux home server. I can connect to my daemon by selecting 'remote node' in my settings using the local IP of my home server. ...
1
vote
0answers
292 views

Accidentally added a receiving monero address, How do i delete?

I stupidly Accidentally added a receiving monero address by pasting an address into the 1 part of the receiving page on monero wallet under my primary receiving address. I cannot find a way to undo ...
1
vote
1answer
316 views

Wrong chain, maybe - maybe not - no transaction possible, wrong balance… please help!

I'm really getting so frustrated - cannot resolve following issue: My wallet is showing the wrong balance I cannot transfer any money ("Daemon is busy") Seems like I am on the wrong chain, right? ...
1
vote
1answer
115 views

The exception unknown software exception (0x40000015) occurred in Monero Wallet

I have ~6.5 Monero coins stuck in this wallet ... I get this error plus and error that says the Daemon isn't working. I have no clue what's going on or how to fix this problem. I'm on v12.2(not 12....
1
vote
0answers
539 views

Monero GUI wallet stuck/increasing while syncing blockchain

Monero GUI wallet stuck/increasing while syncing blockchain I downloaded the Monero GUI wallet and have been attempting to sync the blockchain for a couple of days now. I left it overnight with about ...
1
vote
0answers
60 views

Restored wallet in Qubes Monero client showing “not connected to daemon” despite being connected to daemon

I'm using it on Qubes, which I've never had the slightest problem with until Lithium Luna. I ended up reinstalling everything from scratch for a different reason (and by 'everything' I mean everything,...
1
vote
0answers
124 views

How can I see my balance?

I'm just new to Monero and downloaded the wallet a couple of days ago. It was fully synced and I've sent 3 transactions to the wallet. Everything was working fine. I synced through a remote node. ...
1
vote
0answers
35 views

new windows computer, trying to sync my wallet from OSX

I had a computer running OSX and a functional monero 12 GUI wallet operating with a little over 1.05 XMR, 2 weeks ago.. then I had to sell my computer in order to cover the cost of an emergency ...
1
vote
0answers
182 views

Mining on testnet

I'm trying to obtain some coins in testnet, so I started monerod, waited until it sync and started mining. I've got such messages: 2018-04-11 14:31:43.803 [RPC0] WARN miner src/...
1
vote
0answers
438 views

blockheight unconfirmed

I'm using the new GUI and made a deposit on it from an exchange. 32 hours ago it was approved from the exchange. Since then i'm waiting to see the amount on my wallet. I can see it in the history, but ...
1
vote
0answers
127 views

Error when running GUI Wallet on Ubuntu (core dumped)

When I'm trying to run monero-gui-v0.11.1.0 on Ubuntu 14.04, I'm getting the following errors. After running start-gui.sh on the terminal: app startd *** Error in `./monero-wallet-gui': free(): ...