Questions tagged [monero-wallet-gui]
The official Monero Graphical User Interface maintained by the Monero Core Team.
613
questions
0
votes
0answers
14 views
Wallet not Syning
I'm using the Monero GUI wallet. My internet connection is 110Mbps. I left a private node running on Windoes 10 all night via ethernet connection. I also have an older Bootstrap wallet and they both ...
0
votes
1answer
29 views
How to compile OSX static version
I have trying to compile monero-gui on Mac with the command
make release-static
But got this errors:
CMake Error at /usr/local/opt/boost/lib/cmake/Boost-1.76.0/BoostConfig.cmake:141 (find_package):
...
0
votes
0answers
13 views
Persistent Transactions Failed in Monero GUI, can't recover in CLI
All my transactions over the past couple of weeks have been failing in my GUI wallet. I think this means the blockchain data is out of sync.
I tried using the "Interface" in the GUI to flush ...
0
votes
1answer
85 views
Using multiple wallets for anonimity?
I'm trying to transfer monero between my newly created 6 GUI accounts (with corresponding wallets) to eliminate/reduce the traceability of my coins. I understand this process to be called "...
0
votes
0answers
9 views
Error in start daemon on Ubuntu [duplicate]
E exception in main! Attempt to get block from height 1609544 failed -- block not in db
1
vote
0answers
29 views
GoMonero GUI Wallet works on Windows but not Linux. Can you think why
I have a dual-boot laptop with a W10 partition and a Debian-based Linux distro called Tails with only 8GB space(!). I installed the 64-bit Linux file it installed fine, but I have to use a remote node ...
1
vote
0answers
15 views
Different Wallet Assigned to Trezor Model T Monero GUI
When I hooked up my Trezor Model T to my MoneroGUI account, it was under a wallet named "Trezoe" everytime I try to open this wallet while the device is hooked up it says "Device ...
1
vote
0answers
46 views
Daemon not syncing; Monero 'Oxygen Orion' (v0.17.1.7-release) Error: Problem fetching info-- rpc_request: [duplicate]
downloaded new GUI: Monero 'Oxygen Orion' (v0.17.1.7-release). Haven't loaded the GUI in almost a year, so node is a lot of blocks behind but I know the blockchain location is correct, network status ...
2
votes
1answer
61 views
monero-wallet-gui on android playstore
As of today, what would be required to deploy monero-wallet-gui on android playstore?
0
votes
1answer
31 views
GUI Errrant "Failed Transcation"
I can see a Stagnet transaction from one of my wallets to another has succeed using https://stagenet.xmrchain.net, (with over 11 confirmation). but neither of my GUI wallets say it went through -- in ...
1
vote
1answer
19 views
What's inside the file hashes.txt.sig?
I studied the monero-gui code and in the file monero-gui/src/qt/updater.cpp I found two addresses to verify binaries:
https://web.getmonero.org/downloads/hashes.txt
https://web.getmonero.org/...
1
vote
1answer
120 views
Monero GUI wallet - stuck after blockchain sync succeeded
I seem to be running the latest version of the GUI screenshot attached.
The blockchain looks to me like it's synchronized correctly.
In the logs for my blockchain I see that it is synced :
2021-07-22 ...
0
votes
0answers
65 views
electrum style word list failed verification
I've spent some time trying to restore my wallet on Monero GUI that I used last in June 2021, but I get this message every time I get to the "You're all set up" page.
1
vote
1answer
57 views
Sent XMR To My Desktop GUI Wallet From BEFORE being fully synced - Daemon is Synced but XMR is Still Not in Wallet? Any Help Would Be Great [duplicate]
I made a stupid mistake... Sent XMR To My Desktop GUI Wallet From Kucoin BEFORE being fully synced. Kucoin says "sent successful" to my Wallet ID - I didn't realize I had not yet synced. It ...
0
votes
0answers
28 views
Monero GUI with Ledger Nano S. Synchronizing forever and not showing transaction received [duplicate]
Sent from Kucoin, which says transaction was completed hours ago, but not showing up in my wallet. The GUI says Synchronizing Wallet and Synchronizing Daemon for a long time now. The wallet does ...
1
vote
0answers
28 views
Can I use BOTH a Trezor T and Ledger S with the same Monero-GUI wallet?
Trying to wrap my head around this. I have both a Trezor T and Ledger S.
I use the same seed on both devices as a sort of redundancy.
I just set up the Trezor with Monero's GUI. Worked great, although ...
0
votes
0answers
9 views
Restoring Monero wallet using Trezor T and seed [duplicate]
I forgot my passphrase on the Monero Windows GUI. I have access to the Trezor T, and I have the seed.
My seed from Trezor is 12 words long; the Monero wallet is asking for a 25 word seed. When I ...
0
votes
0answers
9 views
Forgot GUI password, restored through Ledger, but no funds available [duplicate]
I forgot my GUI password to access my xmr funds. I went through the route of Restoring a wallet from device while ledger was plugged into my computer. Once account was restored i had no XMR funds ...
1
vote
1answer
20 views
Where monero gui session stored?
i have a problem.
I was using official monero gui wallet, and everything was ok, when i created a wallet, i didn’t save my mnemonic words, but my wallet worked fine with password authentication.
...
1
vote
0answers
12 views
GUI wallet cosmetic issue
My computer is showing completely messy the characters of the GUI interface.
This is start happen when i upgrade to 0.17.2.2.
I try to reinstall and uninstall doesn't works always not show characters....
0
votes
1answer
77 views
Error: Couldn't connect to daemon: 127.0.0.1:18081 every single time
I'm running Windows 10 so I can't use any Linux commands which everything I've looked up has when faced with this issue. I've uninstalled and reinstalled it a few times, I've turned off my antivirus ...
0
votes
0answers
69 views
gui can't connect to local node (after successful sync)
I'm a newbie.
I downloaded the Linux monerod and monero-wallet-gui and synchronized the network. Earlier today, the log showed
2021-06-11 09:11:53.008 [P2P1] INFO global src/cryptonote_protocol/...
0
votes
1answer
185 views
Time Required for Initial Blockchain Sync
I am a beginner interested in trading and mining the Monero Cryptocurrency. I am using an Arch based Linux distribution and I have downloaded the monero-gui package from the Arch package repository to ...
0
votes
0answers
12 views
How do I restore my Monero GUI wallet on Ledger Nano X [duplicate]
Hi I'm new to Monero and would appreciate some help. I need to restore my Monero GUI Wallet on a new Windows 10 PC. The wallet was previously linked to my Ledger Nano X. When I open the GUI on the new ...
0
votes
0answers
23 views
GUI Wallet Error : Wrong Device Status:0x6e00 (SW_CLA_NOT_SUPPORTED), EXPECTED 0x9000 (SW_OK), MASK 0xffff [duplicate]
I see this error message when trying to create a new wallet with hardware (Ledger Nano X)
failed to generate new wallet:Wrong Device Status:0x6e00 (SW_CLA_NOT_SUPPORTED), EXPECTED 0x9000 (SW_OK),MASK ...
0
votes
1answer
73 views
Can I mine with XMRig and the Monero GUI at the same time?
I am a beginner and doing CPU mining on my laptop. My question is, can I mine with XMRig and the Monero GUI at the same time?
0
votes
1answer
33 views
Do I have to run my Monero Wallet as an Administrator?
My Monero wallet needed to resync every time I closed it out and opened it again (Wallet blocks remaining). I discovered that running the wallet as an administrator allows the autosaving feature of ...
0
votes
0answers
24 views
Trying to update Monero GUI (with Trezor) to 17.2.2 and getting Error Message
Using Windows 10, Monero GUI on Trezor.
Trying to update to 17.2.2 but getting stopped here:
I still get an error message when it tries to close the application. I don't have the Monero GUI open so ...
0
votes
0answers
31 views
Disconnected while solo mining
I am unable to solo mine more than one thread. If I choose more than one thread the mining stops and I get disconnected from the network. I have to restart the deamon to get connected and synced again....
0
votes
0answers
36 views
Account#0 Primary account returns an old balance, Wallet restored with Electrum seed syncs but no coins shown
I see dEBRUYNE answered similar in 2018.
Linux Mint 20 and monero-wallet-gui in conjunction with Ledger Nano S.
Device initiates. Monero 'Oxygen Orion' (v0.17.2.0-release).
Stalls on Forking to ...
0
votes
0answers
36 views
Can't Withdraw Monero out of my Monero wallet
i'm using ledger nanoS firmware 2.0.0
Monero firmware app 1.7.6 on ledger
And monero gui wallet 0.17.2.2
so i'm using the latest version of every firmware and app, i still can't manage to send my XMR ...
0
votes
2answers
122 views
I lost all my funds after performing a transaction on the wrong (old) chain
Firstly I am assuming the responsibility for this loss, it was my mistake and if I cannot get back my coins, that is something I will have to deal with myself. I won't blame anyone other than me.
Back ...
0
votes
0answers
13 views
Restore monero crypto from ledger nano S to GUI monero app [duplicate]
Good day, I want to ask if you have experience with recovering monero coins using ledger device via monero GUI application.
I'm trying to recover my cryptocurrencies, but it still shows me that there ...
0
votes
0answers
71 views
RE:Monero GUI - "Start Mining" greyed out
Excuse the noobness.
I have installed Monero GUI Wallet on a persistent TAILS OS USB bootable drive.
I have downloaded the Monero Blockchain and fully synhronized the Wallet and Daemon. All working ...
0
votes
0answers
31 views
Compromised Ledger seed
I use a Nano S to access my ETH and XMR through GUI. I suspect my 24 seed might have been compromised -- really far possibility but I'm paranoid so I just ordered a new Nano X.
I plan to transfer my ...
0
votes
0answers
30 views
My Monero does not appear in wallet after reseeding
Appreciate the forum and community.
I have two seeds from two wallets with coins that I have not opened in a few years. I have Monero and I have Monero V.
Recently I downloaded the GUI wallets for ...
1
vote
1answer
43 views
Monero GUI - Is Daemon blocks remaining accurate when using --prune-blockchain?
When using the --prune-blockchain flag in the Monero GUI, the "Daemon blocks remaining" message still seems to start as the number of blocks in the full (unpruned) ledger. Is this normal? ...
0
votes
0answers
69 views
GUI: Exclude localhost when connection through Socks5 proxy for other connections?
Is there a way to exclude localhost (aka 127.0.0.1) from being proxied when the "Socks5 proxy" option is enabled in the GUI?
This still would allow updates and fiat exchange rates to be ...
0
votes
2answers
59 views
Accidently send funds to non-hardware wallet (GUI desktop). Would like to move them to hardware wallet
I purchased some monero and successfully sent my funds to my GUI desktop wallet. Stupidly, I created the hardware wallet account on the GUI desktop AFTER I had already sent the funds to my "...
0
votes
0answers
30 views
I downloaded the monero GUI app and linked my ledger nano S but I can't sync with the network (see attachment)
It says 'starting of de node didn't work'
C:\Program Files\ Monero GUI Wallet \ monerod.exe ' executable is missing
Control the logs of your wallet and node on mistakes. Or try to restart monerod.exe ...
0
votes
0answers
102 views
restored GUI wallet from 25 seeds, balance=0
I am using Ledger S. I had not opened it about 6 months and now when I did open it, it told me that some GUI wallet files are missing from the PC or something like that. I then restored my Monero GUI ...
0
votes
1answer
118 views
Unable to send funds from GUI, error: Couldn't send the money: daemon is busy. Please try again later
Dameon is connected and sync'd yet won't send funds. I've been trying for 2 days and every time it confirms the address and the send request and then after entering the wallet password it says "...
0
votes
0answers
20 views
Couldn't open wallet: wrong device status: 0x6a30 (UNKNOWN) EXPECTED 0x9000 (SW_OK) MASK 0xffff [duplicate]
I cannot open the wallet anymore on my Ledger Nano S. Ledger is working fine with other crypto.
Every this failure:
Couldn't open wallet: wrong device status: 0x6a30 (UNKNOWN) EXPECTED 0x9000 (SW_OK) ...
0
votes
0answers
42 views
Monero MAC GUI crashes when sending
After recently setting up Trezor T with the MAC Monero GUI, I went to send Monero on the Trezor T, and every time I tried it crashed the Monero GUI. After poking around.... In settings I noticed that (...
0
votes
0answers
53 views
I Need Help Please With Monero GUI wallet issue
please help, I exchanged BTC to Monero using changehero.io and changenow.io, i am still yet to receive the funds on my xmr for two days now. I had two separate transactions, no one is reflecting on my ...
0
votes
0answers
38 views
Monero GUI 0.17.1.9 'not supported' on this type of Mac
I downloaded the Monero GUI 0.17.1.9 .dmg, but when I opened the disk image, the GUI app icon has a slashed circle across it, it's 'Not Supported on this type of Mac'. I previously ran v0.13.0.4 or ...
0
votes
1answer
89 views
Daemon sync never starting - can't receive my funds
I'm pretty new to Monero and I've checked many FAQ's or forums to solve this issue, but I can't find a good answer. I've recently bought some Monero coins on Agoradesk. Sent it to my Monero GUI wallet,...
0
votes
1answer
33 views
Monero old version wallet wipeout my xmr
I opened my wallet in gui 0.15.0.2, then files amnesia.old_cache and amnesia.unportable was made and my wallet was wipeout. I don't know what's going on.
1
vote
0answers
25 views
How to verify the SSL certificate of a node in the (GUI) wallet?
I'm connecting to a remote node that uses SSL. The node uses a self-signed certificate. When connecting, the GUI wallet didn't ask me to accept the certificate nor can I find any way to check and ...
0
votes
1answer
28 views
Monero GUI isn't letting me create wallet from Ledger (monero-wallet-gui) [duplicate]
I've seen How do I generate a Ledger Monero wallet with the GUI (monero-wallet-gui)? but the Create Wallet From Hardware option isn't appearing for me.
I've followed the steps in the the linked guide.
...
