Questions tagged [full-node]
A device on the internet running the monero software, with a full copy of the monero blockchain, actively assisting the monero network in maintenance of that blockchain.
116
questions
1
vote
1answer
38 views
Is there a way to see all the transactions coming through my Monero node?
I'm running monerod on my Ubuntu server and if I create a transaction using Monerujo using my node to process it, can I see it in my monerod console? If not, how can I see the transactions going ...
0
votes
0answers
54 views
Trouble setting up Local Node on Tails
I'm trying to run the commands to download the blockchain to an external drive in Tails. I tried to put a folder for the blockchain on an ext4 partition but it won't let me write to it so I thought I ...
1
vote
1answer
24 views
Is it possible to connect to multiple remote nodes?
A big drawback with connecting to a remote node is adding a central point of failure by trusting that node. Being able to connect to multiple remote nodes would reduce this significantly - is this ...
2
votes
1answer
60 views
How do I handle “WARNING: You may not have a high enough lockable memory limit, see ulimit -l”?
Upon running monero-wallet-cli after a fresh master build of Monero 'Boron Butterfly' (v0.14.1.0-5fbfa8a) I received the message:
WARNING: You may not have a high enough lockable memory limit, see ...
0
votes
0answers
23 views
Need help allowing my node to go remote
So I'm trying to let my node go external, so I can connect my own monerujo to it and offer it to others who might want to use it...
It runs just fine if I leave the startup flags empty. (edit: ...
1
vote
1answer
48 views
I want to run a node. Is it better for the community for me to run it at home, or on a VPS?
As the title says, I want to run my own node. I own a few domain names, so I was considering running it on a VPS and pointing a domain to it. However, that will cost me about $20/month for the VPS+...
2
votes
1answer
48 views
How can I check the network usage of my Monero node?
I would like to check the network use of my Monero node (daemon). I would like to see the average upload and download speeds, and I would like to see the total amount of data (eg: in MB, GB, TB) that ...
1
vote
1answer
75 views
Daemon stopped syncing
I am using v0.14.0.2-release on Windows, and launching the monerod daemon with ./monerod.exe --block-sync-size=10 --data-dir=/f/.monero/ syncs correctly up to height 1788144. After that, the daemon ...
1
vote
1answer
39 views
How can I back up my node efficiently?
I have two external disks, each with a copy of the Monero blockchain. Most of the time, one of the disks sits in a cupboard and its copy of the blockchain lags behind. Every few days, I plug it in and ...
4
votes
1answer
64 views
How to check a detached daemon without a wallet?
I have set a Monero node as a service on a virtual machine with --detach option to run it in the background. I can check the service status through Linux command or connect to the node with a wallet.
...
1
vote
1answer
49 views
Which is the most efficient way to run a Monero full node on a bare-metal hypervisor?
I would like to install a full Monero node on a Proxmox hypervisor. I was wondering what was the best solution (virtual server, LXC container or docker container on top of a VM) and if there were ...
0
votes
1answer
22 views
Are there other URL parameters when querying a Monero node's get_info method?
When querying a Monero node like this: http://node.supportxmr.com:18081/get_info
I get the info of the node, but are there other parameters besides "get_info"? Can I pass in other data? Is there a ...
0
votes
1answer
42 views
I set up my public node to use port 18089, but why does monerod keep trying to connect to port 18081?
I have a VPS and would like to run a public node and get it indexed by moneroworld to help the network.
I made the necessary changes to monerod.conf to change the port to 18089 and to restrict things ...
3
votes
2answers
114 views
What is the best way to help the Monero network?
Apart from profitability, for the Monero network it doesn't make a big
difference if you solo-mine or not.
This answer to Is it better to mine Monero on solo mining or joining a mining pool? ...
3
votes
1answer
384 views
Opening Port 18080 for Incoming Connections on Router
How do I make port 18080 open for incoming connections on my router on Linux (Ubuntu 16.04) for running the Monero daemon?
I don't have access to the physical router in my building that I use for ...
1
vote
1answer
68 views
Running a Monero Node on Linux (Ubuntu 16.04) with no incoming connections
Is there any point in having monerod daemon running all the time without any open ports for incoming?
Does it still help the Monero network by providing a node or is it pointless?
I am unable to ...
0
votes
1answer
40 views
I run a full monero node, is there a way to see my node on the network? Can I mark my node some how?
I'm running a monero full node. Is there a way to see my node on the network? Is there a way to label my node that others can also see it. Say i wanted to label it as: "Free Open Monero v13 Node"
0
votes
1answer
106 views
Monerd error on rpc-bind to make a public node
I set my rpc-bind-ip=x.x.x.x in my bitmonero.conf file and used my public IP addres. But I am getting this error:
ERROR default src/rpc/rpc_args.cpp:80 --rpc-bind-ip permits inbound
unencrypted ...
1
vote
1answer
62 views
How much traffic does the simplewallet use?
Lets assume I want to start to sync from the last 10.000 blocks.
What does the wallet need to refresh from the monero daemon or remote node?
Something like block headers?
How big is that that needs ...
0
votes
1answer
53 views
Hosting a Remote Node
Are there specific parameters you need to use in order to host a remote node for the Wallet gui? how does one host a remote note?
0
votes
2answers
195 views
Can't connect to my full node outside my local network
I've been having trouble connecting to my monero remote note from outside my local network.
This is the command I've been using to launch the daemon:
monerod.exe --data-dir E:/bitmonero --rpc-bind-...
0
votes
1answer
72 views
Syncing my full node - only connects to 1 peer
So I get the following error while trying to sync my full node:
https://gyazo.com/fb60b6b862f08d95abbe702b85ec6be4
Basically it seems like I'm only connecting to one node, and rejecting all the ...
2
votes
1answer
72 views
Personal Node on Server 2012 R2
I'd like to run a personal node on existing infrastructure, which already provides peer2site VPN connection. So I installed Monero GUI on the Server and synced blockchain. Now I want to connect to ...
0
votes
1answer
95 views
Does it make sense to run two nodes in order to disguise your identifiable information?
I'm repeatedly encountering statements related to passive monitoring.
Like that:
If you send XMR frequently to another person, an attacker passively monitoring both parties will know with ...
2
votes
1answer
89 views
How to nodes discover other nodes?
How do nodes/wallets know what is the IP of the "nearby" node running monerod. How do they discover other nodes?
1
vote
1answer
120 views
Transferred Monero from Shapeshift, want to send to different address
I used Shapeshift to convert BTC to XMR, and then had the XMR send to my Monero Desktop Wallet.
This was the first time I used this. I noticed I had to sync, before the balance will show, but I don't ...
1
vote
2answers
2k views
Best method of speeding up Monero downloading / syncing of the xmr blockchain?
My node is 8000 blocks behind, and its taking quite a while to sync. Is there a faster way to sync / download the Monero blockchain?
3
votes
1answer
100 views
Is there a way to know how many people are using my public remote node?
I am running a public remote node along with a network crawler (xmr.be) and I would like to know how many people are using my node to sync their wallet.
The only metric that the daemon is giving me ...
3
votes
1answer
142 views
What are the differences between incoming/outgoing connections?
If I understood correctly, a connection is outgoing if it was initiated by my node, otherwise it is incoming. Therefore, I was under the impression that with a fully synced blockchain, you should have ...
5
votes
2answers
3k views
What is the purpose of running a Monero node?
Why should I keep a Monero node running? Will I be making profit from network fees from transfers?
3
votes
1answer
504 views
How to setup own remote Monero node with maximum security / anonymity?
I'm interested in setting up my own remote monero node for personal use on a home computer running OSX. According to this guide all I need to do is setup an SSH-connection with a command line which ...
6
votes
1answer
308 views
How do I check if monerod is up to date
Is there a way to tell if a node I am running is "current" along with the rest of the network? For example, if I am checking transactions against my node, how do I first ensure that my node's copy of ...
1
vote
2answers
139 views
Mining intermittently throughout the day
New to this and on a slow learning curve. Mining with cpu at approx 80-90 H/s. I only start the daemon when I am working on my computer. So on-and-off many times throughout the day. Besides being ...
2
votes
1answer
291 views
Windows users, do you want to prepare your OS to use full node wallet, solve some sync issues and make your chaindata less likely to be corrupted?
Get to read this before using your Windows wallet-gui or cli, and to fix some sync issues.
2
votes
1answer
384 views
Can you make a send transaction with a monero remote node setup?
Setting up a remote node requires access to a full node that has the entire blockchain downloaded right?
So does this mean my remote node can do everything as if it had the
full blockchain downloaded?...
2
votes
1answer
338 views
Does the --hide-my-port option reduce traffic?
While trying to maintain a local full Monero or Aeon node with limited bandwith available, does the --hide-my-port option reduce traffic (even if no port forwarding is enabled at the router)?
3
votes
1answer
3k views
How to connect to my own remote node?
I'm trying to connect to my own remote node by running
./monero-wallet-cli --daemon-address <my ip>:18081
but this command fails: Daemon either is not started or wrong port was passed
The ...
2
votes
0answers
681 views
Troubleshooting monerod segmentation fault
I was running a fresh monero full node through it first synchronization.
After a long while through the synchronization noticed the daemon became stuck synchronizing a particular block, so I orderly ...
4
votes
1answer
143 views
Does running a full node becomes harder as the blockchain grows?
I'm wondering if a larger blockchain means that running a full node is computationally harder, i.e. requires more resources?
(maybe more verifications should be done?)
4
votes
1answer
199 views
How can I run a node with fluffy blocks enabled?
Now that fluffy blocks (compact blocks) are enabled with release 0.11.0.0, how can I enable them on my node?
2
votes
1answer
416 views
How many active nodes currently are there mining daily in monero？
Recently, I'm working on some simulations targeting monero mainnet, and want to make them as close as possible to that in the mainnet. To set up the environment for simulations, the number of nodes ...
2
votes
1answer
950 views
Difference between --rpc-bind-ip 0.0.0.0, or loopback, or actual IP
I run a node from home. I use --rpc-bind-ip as a daemon flag, with my internal/LAN IP address as the argument. With this setup, I can access my node from wallets on different computers inside my LAN....
2
votes
1answer
95 views
Can a full Monero node be restricted to run only at specific times?
I have an ISP that provides 5000GB of data to use between 1am and 7am. Is there any way to run the full node, but run it only during that time period? I don't have any data to spare during the day, ...
4
votes
2answers
561 views
Why does my monerod always consume all the RAM?
I have a 24/7 full-node of 10.3.1 on win7 x64
It runs with --restricted-rpc --block-sync-size 10 --rpc-bind-ip xx.xx.xx.xx --confirm-external-bind --data-dir C:\Users\user\Documents\XMRdb --add-...
2
votes
1answer
1k views
How do I start the monerod daemon as a remote node with a username and password requirement to connect to it?
I'd like to restrict my remote node so that only certain people can connect to it when they'd like to sync their wallet. How can I set up a username and password with my monerod daemon, so that people ...
2
votes
1answer
215 views
What are the 'Login (optional)' fields for in the GUI settings?
There are 'Username' and 'Password' fields in the GUI settings. What are they for?
2
votes
2answers
769 views
Monero GUI Changing from host node to local node
I have deposited coins into my Monero GUI wallet prior to the completion of full node synchronization. My coins are not visible and synchronization is very slow for me, currently 5 days with still ...
11
votes
1answer
4k views
What does Monero's scaling roadmap look like
I know Monero is dynamically scalable, but everyone knows that simply increasing blocksize does not make a blockchain scale.
Nodes will still need to download the entire blockchain to function. The ...
3
votes
1answer
1k views
Error when launching (--rpc-bind-ip) monerod with external IP address: Failed to bind server
I thought I would try and set up a remote node, but I'm getting errors:
$ ./monerod --rpc-bind-ip 31.xxx.xxx.xxx --restricted-rpc --confirm-external-bind
2017-05-30 10:47:13.002 INFO global ...
3
votes
1answer
244 views
Failing unit test for full node. How serious is it?
Hi I have successfully built monerod from github source (by this I mean that cmake did not report any errors). However, running make release-test gave me the following output:
Test project /home/<...
