Questions tagged [daemon]
Program that implements the protocol for remote procedure call (RPC) use. For Monero it is called monerod
197
questions
0
votes
1
answer
386
views
Monero GUI not recognising my Ledger X anymore...how can I get it to remember?
I set up my Ledger X successfully back in May 2020 and decided against setting up a password for simplicity's sake. I recently updated to the new MUI 0.17.1.4 - Oxygen Orion in preparation for the ...
0
votes
1
answer
7k
views
Coudn't connect to daemon
Wallet do not synchronizing because he couldn't connect to daemon. Win 10. Restore height is 2150000.
I tried:
Reinstall GUI (I had used latest version (17.4) before, but anyway)
Start monerod
Resync ...
- 31
1
vote
1
answer
3k
views
Daemon blocks remaining, Daemon is syncing but nothing happening? [closed]
Finally I have created my Monero wallet, however syncing is going on forever, there is nothing happening. Is this normal?
- 11
0
votes
1
answer
3k
views
Error: Couldn't connect to daemon: 127.0.0.1:18081 [duplicate]
My GUi got stuck so i removed p2pdata and tried block size command .. Instead of getting unstuck i get the error :Error: Couldn't connect to daemon: 127.0.0.1:18081
Also tried Monero GUI, cant sync ...
- 1
1
vote
1
answer
97
views
Monero RPC command for getting global index of one-time public key
I know there is a Monero RPC command /get_outs for getting one-time output (stealth address) information, including the public key, from the global index of the output. Is there a reverse command? In ...
- 111
0
votes
1
answer
77
views
How to start syncing and check status of Remote Daemon Node using monero-javascript npm package?
I am using monero-javascript library to make a web app. When, I change the remote node, how can I start syncing my existing wallet with new Remote node.
Also when I do:
curl http://node.moneroworld....
0
votes
0
answers
3k
views
Monero GUI wallet blocks wont sync and now my funds are missing
I have had monero GUI for about 6 months time and i have used it a bit for sending XMR.
A few days ago my GUI didnt want to finalize synch with DAEMON. it kept loading and "crashing" and ...
- 1
0
votes
0
answers
1k
views
failed to connect to daemon on tails
My cli wallet was working before but now I get the error mesage when I log in (or refresh) that the wallet cannot connect to daemon.
Error: wallet failed to connect to daemon: >2xmrnode5itf65lz....
0
votes
1
answer
41
views
Multi VPS servers with monero installed for remote connections. Monero Gateway Redirection?
I have a few VPS servers with monero installed. I use these servers when connecting from my desktop or mobile wallet. Every now and then they fail for whatever reason and require a restart. Is there a ...
- 4,510
0
votes
0
answers
125
views
Cant finish syncronization
Good Day
I hope someone can assist me.I have downloaded monero and the syncronization has been busy for 50hours and it has downloaded 77GB excluding the 30GB LMBD folder. i need to know how much will ...
- 1
0
votes
1
answer
721
views
Is my monero safe?
I sent Monero to an address which was shown in my GUI Wallet, but I think I haven't finished setting up the wallet... should the address start with 4 or 8? Also, is it safe if I don't yet see my total ...
- 1
2
votes
1
answer
946
views
What is the difference between monerod --detach and monerod --non-interactive?
It seems like each of these would run monerod in the background. How does the behavior differ? Under what circumstances might one choose --detached over --non-interactive or vice versa?
- 5,495
2
votes
1
answer
64
views
How should I approach the issue that bans do not persist after ending the monerod process?
I've been manually banning peers that are (a) clogging up my logs and (b) taking away space that would otherwise be used for legitimate in_peer connections (which I have limited for data usage reasons)...
- 5,495
1
vote
1
answer
144
views
What is miner_tx_hash?
I am trying to figure out the Daemon RPC API.
Requesting a block with get_block(), the block header has a field miner_tx_hash.
The block also contains a JSON field miner_tx, which contains the ...
- 147
2
votes
1
answer
2k
views
Running a Monero node over TOR from external SSD hard drive with wallet
Pardon my ignorance, the other day, I asked a question about setting up a Monero node and wallet on my PC. I have now decided not to do that, and instead will set up on an external SSD drive. There is ...
- 121
0
votes
1
answer
806
views
Running a Monero node from a home PC with Broadband unlimited download over TOR. Doable?
I want to run a Monero node from home.
My PC details:
Processor Intel (R) Pentium (R) CPU N3700 @1.60GHz
1.60GHz
RAM - 4 GB 64 bit operating system x64 based processor
Total space 465 GB, Out ...
- 121
0
votes
1
answer
80
views
How does it affect my node when I get the message: "No incoming connections - check firewalls/routers"
I don't have any ports open and I get the message: "No incoming connections - check firewalls/routers". What does this impact on my node? Can I still connect to my node locally and use its RPC ...
- 4,510
0
votes
1
answer
93
views
What exactly happened in the 2019 Nov Monero CLI hack?
There were reports of Monero CLI binaries not matching for the v0.15 release in November of 2019. What exactly happened and how can it be prevented in the future? Did it only affect the cli wallet ...
- 4,510
0
votes
1
answer
293
views
How to get the transaction public key and outputs from get_transactions?
I'm trying to get the outputs and tx public key according to this answer.
I know that the transaction public key must be in the "extra" section.
When I ran the get_transactions command, I got this ...
- 209
2
votes
1
answer
94
views
how to get 'generator point' for Monero transaction
I am using get_transactions of daemon rpc to get specifics of a transaction.
Trying to check incoming transactions manually by checking this method :
is_mine(out, R, i):
P = Hs(8aR||i)G + B
...
- 209
0
votes
0
answers
254
views
How do I update the daemon and open port 18080?
I have tried to open port 18080, but still it says:
No incoming connections - check firewalls/routers allow port 18080
Can anyone see what I've done wrong?
Also, I am getting this message:
...
3
votes
1
answer
133
views
Can I look for incoming transactions with only my private view key?
I have a wallet and without using Monero Wallet GUI, I want to check for incoming transactions every 5 minutes. For that, I will write code (in .NET), that will execute a method every 5 minutes.
...
- 209
4
votes
1
answer
146
views
How can I permanently ban a peer?
I have to repeatedly ban the same peer because it eventually (too soon) gets unbanned and then my daemon output spams me with "peer claims higher version that we think." This issue persists with this ...
- 5,495
2
votes
3
answers
451
views
How to create a transaction offline using javascript?
I saw a method for sending a transaction to a daemon, but can't find information on how to create and sign a tx using javascript. I can't use the wallet-cli/RPC etc.
- 69
2
votes
1
answer
344
views
Can I process incoming transfers from the daemon RPC?
Can I process incoming transfers using only the daemon RPC and my private view key (so without a wallet)? Or how can I decrypt vout from the get_block output JSON?
- 69
0
votes
0
answers
406
views
"Waiting on daemon synchronization to finish" - still can't fix
first time user of Monero and to be honest, very unsophisticated user of crypto etc etc.... anyway...
Issue: installed monero app on mac, setup app with remote node using Ledger nano S, open the ...
- 1
0
votes
1
answer
43
views
Loki Daemon Node Crashed with Error Adding Block with hash and stuck at 99.99% sync
My Loki daemon node crashed and when restarting I get the following error of: Error Adding Block with Hash: -- I tried restarting a few times and waited. How can I fix this?
- 4,510
1
vote
1
answer
107
views
Monero GUI self-hosted node issue with Ledger - it keeps requesting password
I am running the most recent version of Monero GUI for Mac and Ledger firmware (I just updated the Ledger firmware and just downloaded and setup Monero GUI this weekend).
Everything went smoothly ...
1
vote
4
answers
516
views
How much memory does monerod take on a Ubuntu server?
I'm planning to run a monerod node on my Ubuntu server, but I also have a web server running there and another cryptonote daemon. I was wondering, how much memory does monerod take on Ubuntu?
- 4,510
1
vote
0
answers
1k
views
Daemon thinks it's connected but keeps saying "there were 0 blocks in the last 90 minutes..."
Alright, so I had been using the monero gui wallet for a couple weeks by running my own local node and everything was fine. Then one time when I opened the wallet for some reason it wouldn't connect ...
- 11
1
vote
1
answer
754
views
Do I need to wait for the entire blockchain to download before daemon will connect to wallet?
After having been away from Monero from some time I have uninstalled (hopefully) the old version, deleted the files, and have installed the new gui ( 0.14.0.0 Boron Butterfly). I am restoring from my ...
- 111
0
votes
0
answers
81
views
Help! - 1.5 XMR Bounty [duplicate]
IMGUR ALBUM
Hi - I'm in need of some help. If through someone's help I can recover this XMR, then 1.5 XMR will be given as a thank you! The case:
In Jan 2019 I sent XMR from the Monero GUI to a ...
1
vote
1
answer
186
views
Using monero-php, I am getting "Method not found" when calling open_wallet
I want to open my Monero testnet wallet via a php script
using a remote node but it's returning: "Method not found".
Here is the code I am using:
$hostname = 'node.xmr.to';
$port = '28081';
$...
3
votes
1
answer
38
views
List of transaction hashes in chronological order?
Is there a daemon RPC call to get a list of all the latest transactions and their hashes?
- 167
2
votes
2
answers
4k
views
Running a full node on Tails
So I'm running the Monero GUI on Tails, using remote nodes, and the remote nodes are very unreliable. I was thinking about running a local node. I've read the sheep's noob guide but I'm hesitant to ...
- 21
1
vote
1
answer
91
views
How to get the time at which a transaction was added to the pool?
Can we get information about when a transaction was added to the pool and also when it was mined into a block?
Is there a demon RPC to get that. Or is it generally stored in the block header?
- 167
2
votes
1
answer
62
views
Time from the block added to the pool to time it gets executed
Is there a way to get the data for when each block has been added to the pool and to when it has been executed in monero?
- 167
1
vote
1
answer
79
views
Is there a way to tell if a Monero node is on, even though it is not public facing and behind a router?
I want to setup monerod on a Raspberry Pi and put it behind a router, but I it won't be public facing nor have any forwarded ports. Is there a way to tell if my Raspberry Pi is active with monerod ...
- 4,510
1
vote
2
answers
335
views
Monerod crashes on startup - Failed to create SSL certificate
I am attempting to run a Monero daemon on my Ubuntu 16.04 machine. I followed these steps to compile monero, and have successfully compiled the binaries required to run a Monero daemon.
When I run ...
- 185
0
votes
1
answer
798
views
Daemon sync questions
I've been letting the daemon sync for a while now, a few days actually, and it's at 80% and now going very slowly forward. About 20 blocks at a time. I understand why this happens, but this case seems ...
- 1
4
votes
1
answer
391
views
How to check a detached daemon without a wallet?
I have set a Monero node as a service on a virtual machine with --detach option to run it in the background. I can check the service status through Linux command or connect to the node with a wallet.
...
- 1,621
2
votes
1
answer
470
views
Will I need to update wallet and miner after the next upcoming (March 2019) fork?
I have read about the next upcoming fork planned for the block 1788000 (around the 9th of March). After that block, will I need to update the Monero daemon, the wallet, or both? And what about the ...
- 242
0
votes
1
answer
86
views
Monero fork wont mine blocks after height 3062
I have forked Monero and created the genesis block. Everything seems to be working fine till the block height reaches 3062 and then there are no blocks mined after that. Currently, my blockchain is ...
1
vote
0
answers
140
views
Why does the Monero GUI wallet not save the daemon flags?
The Monero GUI wallet is not saving daemon flags on my system, Ubuntu 18.04.
Also, there is no more start daemon button.
- 11
2
votes
0
answers
493
views
Why has my Monero daemon failed to start? [duplicate]
I successfully started my daemon several months ago using v12 and I haven't used the Monero GUI Wallet since. I just upgraded to v13 and I still can't get it to start.
Following the instructions at ...
- 21
1
vote
0
answers
285
views
Why did I get an 'using an untrusted daemon' warning?
I'm running a full node and I followed every security step to set up the node on my computer. Everything was going great until today when I realized that a view-only wallet created the day before was ...
- 11
1
vote
1
answer
504
views
Monero wallet issue with multiple accounts [duplicate]
I have a monero wallet with more than 10 accounts. When I transfer coins from one account to another, unlocked balance does not refreshed for more than a hour.
After that, I entered rescan_bc and it ...
- 45
1
vote
0
answers
358
views
Monero GUI is unable to start monerod on Ubuntu 18.04
I just installed the Monero GUI 0.13.0.4 Beryllium Bullet on Ubuntu 18.04, and I also installed the libhidapi-libusb library.
When I start the Monero GUI, it fails to start the daemon.
The logs ...
- 11
4
votes
2
answers
2k
views
Opening Port 18080 for Incoming Connections on Router
How do I make port 18080 open for incoming connections on my router on Linux (Ubuntu 16.04) for running the Monero daemon?
I don't have access to the physical router in my building that I use for ...
- 65
1
vote
1
answer
552
views
RPC binary request with Python
I am currently working with the Monero daemon RPC and have a little problem understanding the format of the binary request (/get_o_indexes.bin for example).
Does anyone have an example of how should ...
- 13